Differences between revisions 70 and 71

Vent plans

Prep for next vent

(1) Dichroic mirror replacements for PR3 and SR3

spec in DCC
quotes:
- ATF
- Laseroptik (final)
  - note: 2 deg wedge quote has Fused Silica grade F = 5 ppm homogeneity & micro roughness 0.3 nm RMS, Rana OKed both, 3 wks delivery, Jamie takes care of ordering
Optical table layout needs to be modified
optics in hand
phase map of mirror, in and out of tip-tilt mounts
- what resolution do we need? Need to measure curvature.

Suresh is going to LHO April 15-25 for assembly/shipping of tip-tilts
tip-tilts:
- tip-tilts from LHO
- bake
- assemble
- add mirrors
- level
in-vac cables (quadrapuses)
- ship parts to RND Cables
- place order with RND Cables
- bake
electronics:
- gather components:
  - DAC
  - anti-image filters
  - dewhite filters
  - coil drivers
  - eurocrate
  - cables
- install
- test in DAQ

(3) Black glass beam dumps

(4) OSEM mount screws

(5) New periscope plate

(6) Cavity scattering measurements? (Jan)

(7) Review IP{ANG,POS} alignment/closeup proceedure

relevant pictures:

BSC table, from north, above output PZT0: 1, 2
- Do we have 3 available 25-pin connectors on BSC table??
IOO table, from west, through AC, input PZT0 detail: 1, 2
- It looks like we have (or will have) 1 available 25-pin connector on IOO, which is all we need!
OMC table, from east, through AC, output PZT1 detail: 1, 2
- unclear what is available here

-  ⇤ ← Revision 70 as of 2012-08-22 21:48:26 → 
  Size: 3611
  Editor: JamesonrollinsATligoDOTorg
  Comment:
+   ← Revision 71 as of 2012-10-04 01:08:06 → ⇥
  Size: 3643
  Editor: JamesonrollinsATligoDOTorg
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 16:
-(2) Active tip-tilts (Suresh/Jamie)
+(2) [[IO Active tip-tilts|Suspensions/Tip_Tilts_IO]] (Suresh/Jamie)