Differences between revisions 52 and 53

Vent plans

Prep for next vent

(1) Dichroic mirror for recycling cavities (Jamie)

spec in DCC
quotes:
- ATF
- Laseroptik (final)
  - note: 2 deg wedge quote has Fused Silica grade F = 5 ppm homogeneity & micro roughness 0.3 nm RMS, Rana OKed both, 3 wks delivery, Jamie takes care of ordering
Optical table layout needs to be modified
We have mirrors in hand!
Phase map of mirror, in and out of tip-tilt mounts

(2) Black glass beam dumps

(3) OSEM mount screws

(4) Active tip-tilts (Suresh/Jamie)

(5) Mode-matching telescope adjustments (Jenne/Suresh)

(6) Cavity scattering measurements? (Jan)

(7) Review IP{ANG,POS} alignment/closeup proceedure

-  ⇤ ← Revision 52 as of 2012-07-12 21:38:20 → 
  Size: 2196
  Editor: JamesonrollinsATligoDOTorg
  Comment:
+   ← Revision 53 as of 2012-07-12 21:43:17 → ⇥
  Size: 2333
  Editor: JamesonrollinsATligoDOTorg
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 12:
- * '''''We have mirror in hand!'''''
+ * '''''We have mirrors in hand!'''''
 Line 31:
- * to get:
   * Tip-tilts from LHO
   * Electronics
   * Cables including vacuum-compatible ones and the non-vacuum ones
   * Prepare mirrors
   * Assembly and baking
   * Prepare feedthrough connectors
   * Digital controls
 * '''''Suresh is going to LHO April 15-25 for assembly/shipping of tip-tilts...'''''
+ * --('''''Suresh is going to LHO April 15-25 for assembly/shipping of tip-tilts...''''')--
 * '''''We have tip-tilts from LHO'''''
    * --(baked)--
    * assembled
 * Needed electronics:
    * DAC?
    * anti-image filters?
    * dewhite filters?
    * coil drivers?
    * eurocrate?
 * __'''''Need in vacuum-compatible ones and the non-vacuum ones'''''__
 * Full assembly with mirrors
 * Prepare feedthrough connectors
 * Digital controls