Differences between revisions 47 and 56 (spanning 9 versions)

Vent plans

Prep for next vent

(1) Dichroic mirror for recycling cavities (Jamie)

spec in DCC
quotes:
- ATF
- Laseroptik (final)
  - note: 2 deg wedge quote has Fused Silica grade F = 5 ppm homogeneity & micro roughness 0.3 nm RMS, Rana OKed both, 3 wks delivery, Jamie takes care of ordering
Optical table layout needs to be modified
optics now in hand
Phase map of mirror, in and out of tip-tilt mounts

(2) Black glass beam dumps

Large baffle style covers for the suspensions
Small V-shape pieces for generic purpose
being baked...

(3) OSEM mount screws

Hex-top, longer, sliver-plated
Qty = 100
No-plastic

final design
manufactured
baked
Ready to install

(4) Active tip-tilts (Suresh/Jamie)

Suresh is going to LHO April 15-25 for assembly/shipping of tip-tilts...
tip-tilts:
- We have tip-tilts from LHO
- baked
- assembled
- add mirrors
- level
in-vac cables (quadrapuses)
- Must place order with RND Cables
electronics:
- gather components:
  - DAC
  - anti-image filters
  - dewhite filters
  - coil drivers
  - eurocrate
  - cables

(5) Mode-matching telescope adjustments (Jenne/Suresh)

Need to determine what exactly the problem is.
- What needs to be moved?

(6) Cavity scattering measurements? (Jan)

(7) Review IP{ANG,POS} alignment/closeup proceedure

-  ⇤ ← Revision 47 as of 2012-04-04 22:17:12 → 
  Size: 2089
  Editor: JamesonrollinsATligoDOTorg
  Comment:
+   ← Revision 56 as of 2012-07-16 21:13:00 → ⇥
  Size: 2417
  Editor: JamesonrollinsATligoDOTorg
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 7:
- * wedge angle = 2 deg
-Line 9:
+Line 8:
-   * [[https://wiki-40m.ligo.caltech.edu/vent?action=AttachFile&do=get&target=ATF.pdf|ATF]]
+   * --([[https://wiki-40m.ligo.caltech.edu/vent?action=AttachFile&do=get&target=ATF.pdf|ATF]])--
-Line 13:
+Line 12:
+ * '''''[[http://nodus.ligo.caltech.edu:8080/40m/6907|optics now in hand]]'''''
 * Phase map of mirror, in and out of tip-tilt mounts
-Line 14:
+Line 15:
-(2) Black glass beam dumps (Koji)
+(2) Black glass beam dumps
-Line 20:
+Line 21:
- * '''''being baked...'''''
+ * being baked...
-Line 22:
+Line 23:
-(3) OSEM mount screws (Steve)
 * Hex-top, longer, sliver-plated
 * Qty = 100
 * No-plastic
+(3) OSEM mount screws
   * Hex-top, longer, sliver-plated
   * Qty = 100
   * No-plastic
-Line 27:
+Line 28:
- * '''''manufactured and being baked...'''''
+ * --(manufactured)--
 * --(baked)--
 * '''''Ready to install'''''
-Line 30:
+Line 33:
- * to get:
   * tip-tilts from LHO
   * Electronics
   * Cables including vacuum-compatible ones and the non-vacuum ones
   * Prepare mirrors
   * Assembly and baking
   * Prepare feedthrough connectors
   * Digital controls
 * '''''Suresh is going to LHO April 15-25 for assembly/shipping...'''''
+ * --('''''Suresh is going to LHO April 15-25 for assembly/shipping of tip-tilts...''''')--
 * tip-tilts:
    * '''''We have tip-tilts from LHO'''''
    * --(baked)--
    * --(assembled)--
    * add mirrors
    * level
 * in-vac cables (quadrapuses)
    * __'''''Must place order with RND Cables'''''__
 * electronics:
    * gather components:
      * DAC
      * anti-image filters
      * dewhite filters
      * coil drivers
      * eurocrate
      * cables
-Line 40:
+Line 51:
-(5) OMC activation (Jenne)
 * Calculate the mode matching solutions and prepare appropriate telescopes
 * Draw optical layout
 * Digital controls
+(5) Mode-matching telescope adjustments (Jenne/Suresh)
 * Need to determine what exactly the problem is.
   * What needs to be moved?
-Line 45:
+Line 55:
-(6) OSEM upgrade (somebody)
 * Need a discussion
+(6) Cavity scattering measurements? (Jan)

(7) Review IP{ANG,POS} alignment/closeup proceedure

Vent plans

Prep for next vent

Previous