|
Size: 1923
Comment:
|
Size: 3260
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| There are almost no records in ilog or Elog or wiki-40 about "Weather Station", so this wiki-40 page should serve as an introduction to what is the weather station and what are current problems with it. | There were almost no records in ilog or Elog or wiki-40 about "Weather Station", so this wiki-40 page should serve as an introduction to what is the weather station and what are current problems with it. |
| Line 3: | Line 3: |
| Purpose of Weather Station: it allows to have information about inside/outside temperature, humidity, pressure,... If everything works correctly, this information should be available in two places. Firstly, this information is indicated on the screen of the 'Weather Monitor' (a small black box hanging on the north wall of the laser interferometer room), and secondly, the same information should be available on MEDM screens of the control UNIX computers. | Purpose of the Weather Station: it allows to have information about inside/outside temperature, humidity, pressure, wind speed and direction ... If everything works correctly, this information should be available in two places. Firstly, this information is indicated on the screen of the 'Weather Monitor' (a small black box hanging on the north wall of the laser interferometer room), and secondly, the same information should be available on MEDM screens of the control UNIX computers. |
| Line 5: | Line 5: |
| Currently (as of 1st of April 2008) the only information that seems to be reasonable is the indication of the inside temperature on the screen of 'Weather Monitor'. This means that there are two large separate problems with the weather station. Problem 1: No data for outside temperature, pressure, humidity is available even on the screen of 'Weather Monitor', this means that most probably the outside sensors are dead. Problem 2: No indications on the MEDM 'Checklist' screen on UNIX control computers. This means that processor 'c1pem1' (located in the laser interferometer room near other processors in a DAQ rack near the middle of Y-arm) that should communicate with control UNIX computers does not do his job. |
The Weather Station was assembled together in the summer of 2001 by a SURF student Victor Tsai, and then according to Alan Weinstein, it soon stopped working, and it was in a nonfunctional status for several years before Andrey Rodionov made an attempt to fix it. As of the 1st of April 2008 the only information that seemed to be reasonable was the indication of the inside temperature on the screen of 'Weather Monitor'. This means that there were two separate problems with the weather station. Problem 1: No data for outside temperature, pressure, humidity were available even on the screen of 'Weather Monitor', this means that the signal from outside sensors was lost before getting into the 'Weather Monitor'. Problem 2: No indications on the MEDM 'Checklist' screen on UNIX control computers. This means that processor 'c1pem1' (located in the laser interferometer room near other processors in a DAQ rack near the middle of Y-arm) that should communicate with control UNIX computers did not do his job. By April 4th 2008 both problems were corrected. Firstly, communication between outside sensors and 'Weather Monitor' was restored by re-plugging cable endings into the cable connectors located half-way between the weather sensors on top of the roof and 'Weather Monitor'. Secondly, communication between 'Weather Monitor' and UNIX control computers was revived by rebooting the processor 'c1pem1'. It turned out to be a nontrivial problem because 'c1pem1' was attempting to reboot from a nonexisting computer op140m, so it was necessary to convince 'c1pem1' to boot from 'Linux 1'. |
| Line 11: | Line 15: |
| Weather station consists of commercially available 'Weather Monitor' (made by Davis company), temperature/pressure/humidity sensors that are located outside of the building (on the roof), junction box that allows the signals from the roof outside sensors to be seen on the 'Weather Monitor' screen. Using the commercially available 'Weatherlink' electronic device, one can transfer signals from 'Weather Monitor' to the UNIX control computers. | Weather station consists of commercially available 'Weather Monitor' (made by Davis company), temperature/pressure/humidity sensors that are located outside of the building (on the roof), junction box that allows the signals from the roof outside sensors to be seen on the 'Weather Monitor' screen. Using only outside sensors, junction monitor and 'Weather Monitor', one can read inside/outside temperature, humidity, wind speed/direction and pressure from the screen of 'Weather Monitor'. In addition, using the separate commercially available 'Weatherlink' electronic device, one can transfer signals from 'Weather Monitor' to the UNIX control computers through the processor 'c1pem1'. In this case, data about inside and outside temperatures, amount of precipitation, outside pressure, wind speed and direction is indicated on the 'C0Checklist.adl' EPICS screen of MEDM. |
| Line 15: | Line 19: |
| attachment:DSC_0501-W_Monitor.JPG | attachment:Weath_Monitor.JPG |
There were almost no records in ilog or Elog or wiki-40 about "Weather Station", so this wiki-40 page should serve as an introduction to what is the weather station and what are current problems with it.
Purpose of the Weather Station: it allows to have information about inside/outside temperature, humidity, pressure, wind speed and direction ... If everything works correctly, this information should be available in two places. Firstly, this information is indicated on the screen of the 'Weather Monitor' (a small black box hanging on the north wall of the laser interferometer room), and secondly, the same information should be available on MEDM screens of the control UNIX computers.
The Weather Station was assembled together in the summer of 2001 by a SURF student Victor Tsai, and then according to Alan Weinstein, it soon stopped working, and it was in a nonfunctional status for several years before Andrey Rodionov made an attempt to fix it.
As of the 1st of April 2008 the only information that seemed to be reasonable was the indication of the inside temperature on the screen of 'Weather Monitor'. This means that there were two separate problems with the weather station. Problem 1: No data for outside temperature, pressure, humidity were available even on the screen of 'Weather Monitor', this means that the signal from outside sensors was lost before getting into the 'Weather Monitor'. Problem 2: No indications on the MEDM 'Checklist' screen on UNIX control computers. This means that processor 'c1pem1' (located in the laser interferometer room near other processors in a DAQ rack near the middle of Y-arm) that should communicate with control UNIX computers did not do his job.
By April 4th 2008 both problems were corrected. Firstly, communication between outside sensors and 'Weather Monitor' was restored by re-plugging cable endings into the cable connectors located half-way between the weather sensors on top of the roof and 'Weather Monitor'. Secondly, communication between 'Weather Monitor' and UNIX control computers was revived by rebooting the processor 'c1pem1'. It turned out to be a nontrivial problem because 'c1pem1' was attempting to reboot from a nonexisting computer op140m, so it was necessary to convince 'c1pem1' to boot from 'Linux 1'.
What is 'Weather Station?
Weather station consists of commercially available 'Weather Monitor' (made by Davis company), temperature/pressure/humidity sensors that are located outside of the building (on the roof), junction box that allows the signals from the roof outside sensors to be seen on the 'Weather Monitor' screen. Using only outside sensors, junction monitor and 'Weather Monitor', one can read inside/outside temperature, humidity, wind speed/direction and pressure from the screen of 'Weather Monitor'. In addition, using the separate commercially available 'Weatherlink' electronic device, one can transfer signals from 'Weather Monitor' to the UNIX control computers through the processor 'c1pem1'. In this case, data about inside and outside temperatures, amount of precipitation, outside pressure, wind speed and direction is indicated on the 'C0Checklist.adl' EPICS screen of MEDM.
TO BE CONTINUED
attachment:Weath_Monitor.JPG