Diff for "Upgrade_09/PSL"

Differences between revisions 1 and 3 (spanning 2 versions)

Overview

We will be removing the MOPA and replacing it with a 2W NPRO.
Instead of current shunt, we will change to use an AOM for the fast power stabilization actuator.
We may decide to use a DC coupled servo, with a remotely programmable offset point to be more like the aLIGO system.
Move the reference cavity and its optics to a different pickoff point.
Move the ISS to the end of the PSL table.
Re-engineer the optics for the PSL_POS and PSL_ANG QPDs.
New EOM for triple modulation.
Change the FSS modulation frequency?
Change the FSS RFPD to have a low Q?
Remove the PMC RF modulation (apply it via the NPRO)?
Steel enclosure for the PMC to do temperature stabilization?

-  ⇤ ← Revision 1 as of 2010-04-07 21:35:05 → 
  Size: 31
  Editor: RanaAdhikari
  Comment:
+   ← Revision 3 as of 2010-04-07 21:45:18 → ⇥
  Size: 857
  Editor: RanaAdhikari
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-Describe Upgrade 09/PSL here.
+== Overview ==
 1. We will be removing the MOPA and replacing it with a 2W NPRO.
 1. Instead of current shunt, we will change to use an AOM for the fast power stabilization actuator.
 1. We may decide to use a DC coupled servo, with a remotely programmable offset point to be more like the aLIGO system.
 1. Move the reference cavity and its optics to a different pickoff point.
 1. Move the ISS to the end of the PSL table.
 1. Re-engineer the optics for the PSL_POS and PSL_ANG QPDs.
 1. New EOM for triple modulation.
 1. Change the FSS modulation frequency?
 1. Change the FSS RFPD to have a low Q?
 1. Remove the PMC RF modulation (apply it via the NPRO)?
 1. Steel enclosure for the PMC to do temperature stabilization?

attachment:newlayout.png


=== FSS ===

=== New NPRO ===

=== PMC ===

=== ISS ===

=== Modulator ===