Differences between revisions 6 and 7

40m upgrade installation plan

Main optics team

Pre-vent works
- Tuning of the MC servo ~ low power MC test
- End transmon X/Y Optics relocations (before the vent) for green
- ITM pointing preparations? (green/red pointers at the both ends)
Vent
- What to do before the vent?
- Tuning of the MC servo ~ low power MC test
- ITM pointing preparations? (green/red pointers at the both ends)
ITM placement
- What to do before the ITM placement?
- Suspension assembly
  - Gluing test
  - Optics cleaning
  - Gluing (magnets/standoffs/guide rods)
  - Suspending
- procedure
MMT placement
- What to do before the MMT placement?
- Optics delivery (Shipping Feb 25) / baking
Initial Pointing adjustment
SRM/PRM/BS placement
- What to do before the SRM/PRM/BS placement?
- TT
Closing up the vacuum

before vent
- relocation of existing optics at the end table
during vent
- set up the green stuff onto the end table
- align the green laser to the cavity (how to ?)
- mode matching of the green laser to the cavity
after closing the tanks
- recover IP-ANG and optical levers

-  ⇤ ← Revision 6 as of 2010-02-13 01:10:35 → 
  Size: 1137
  Editor: KojiArai
  Comment:
+   ← Revision 7 as of 2010-02-13 03:16:30 → ⇥
  Size: 1433
  Editor: KiwamuIzumi
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 40:
- * '''Green installation'''
+ * ''' before vent'''
   * relocation of existing optics at the end table
 * '''during vent'''
   * set up the green stuff onto the end table
   * align the green laser to the cavity (how to ?)
   * mode matching of the green laser to the cavity
 * ''' after closing the tanks'''
   * recover IP-ANG and optical levers