Differences between revisions 2 and 8 (spanning 6 versions)

40m upgrade installation plan

Main optics team

Pre-vent works
- Tuning of the MC servo ~ low power MC test
- End transmon X/Y Optics relocations (before the vent) for green
- ITM pointing preparations? (green/red pointers at the both ends)
Vent
- What to do before the vent?
- Tuning of the MC servo ~ low power MC test
- ITM pointing preparations? (green/red pointers at the both ends)
ITM placement
- What to do before the ITM placement?
- Suspension assembly
  - Gluing test
  - Optics cleaning
  - Gluing (magnets/standoffs/guide rods)
  - Suspending
- procedure
MMT placement
- What to do before the MMT placement?
- Optics delivery (Shipping Feb 25) / baking
Initial Pointing adjustment
SRM/PRM/BS placement
- What to do before the SRM/PRM/BS placement?
- TT
Closing up the vacuum

before vent
- relocation of existing optics at the end table -take 1.5day
during vent
- set up the green stuff onto the end table
- align the green laser to the cavity (how to ?)
- mode matching of the green laser to the cavity
after closing the tanks
- recover IP-ANG and optical levers

-  ⇤ ← Revision 2 as of 2010-02-12 00:55:35 → 
  Size: 642
  Editor: KojiArai
  Comment:
+   ← Revision 8 as of 2010-02-13 03:43:13 → ⇥
  Size: 1452
  Editor: KiwamuIzumi
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 5:
- * Vent
+ * '''Pre-vent works'''
  * Tuning of the MC servo ~ low power MC test
  * End transmon X/Y Optics relocations (before the vent) for green
  * ITM pointing preparations? (green/red pointers at the both ends)

 * '''Vent'''
-Line 7:
+Line 12:
-  * low power MC test
+  * Tuning of the MC servo ~ low power MC test
  * ITM pointing preparations? (green/red pointers at the both ends)
-Line 9:
+Line 15:
- * ITM placement
+ * '''ITM placement'''
-Line 18:
+Line 24:
- * MMT placement
+ * '''MMT placement'''
-Line 22:
+Line 28:
- * SRM/PRM/BS placement
+ * '''Initial Pointing adjustment'''

 * '''SRM/PRM/BS placement'''
  * What to do before the SRM/PRM/BS placement?
  * TT
-Line 30:
+Line 40:
-* Green installation
+ * ''' before vent'''
   * relocation of existing optics at the end table  -''take 1.5day''
 * '''during vent'''
   * set up the green stuff onto the end table
   * align the green laser to the cavity (how to ?) 
   * mode matching of the green laser to the cavity
 * ''' after closing the tanks'''
   * recover IP-ANG and optical levers
-Line 36:
+Line 52:
-*
+ * 

---------

== RF team ==
-Line 42:
+Line 62:
-*
+ * Laser delivery (done)
 *