|
Size: 280
Comment:
|
Size: 1035
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 4: | Line 4: |
attachment:hall_sensor_mea_config.JPG The corresponding transfer function of the filter is shown below. It has a corner frequency around 0.1 Hz. attachment:high_pass_TF.JPG === Noise Spectrum === The raw data from the spectrum analyzer by measuring different frequency bands are shown in the figure below. attachment:Vout_rawdata.JPG By normalizing with respect to the high-pass transfer function and piecing different frequency bands together, we obtain the entire spectrum from 0.005 Hz to 1600 Hz of the voltage fluctuation in the Hall-effect sensor. As we can see that the noise spectrum is almost flat from low frequencies to high frequencies. attachment:Vout_normalized_spectrum.JPG ===Displacement sensitivity=== |
We measured the voltage fluctuation of the Hall-effect sensor, from which we infer the displacement sensitivity given the suspended magnet we used. The circuit for this experiment is shown in the following figure, which is a simple high-pass filtering of the sensor output.
attachment:hall_sensor_mea_config.JPG
The corresponding transfer function of the filter is shown below. It has a corner frequency around 0.1 Hz.
attachment:high_pass_TF.JPG
Noise Spectrum
The raw data from the spectrum analyzer by measuring different frequency bands are shown in the figure below.
attachment:Vout_rawdata.JPG
By normalizing with respect to the high-pass transfer function and piecing different frequency bands together, we obtain the entire spectrum from 0.005 Hz to 1600 Hz of the voltage fluctuation in the Hall-effect sensor. As we can see that the noise spectrum is almost flat from low frequencies to high frequencies.
attachment:Vout_normalized_spectrum.JPG
===Displacement sensitivity===