Differences between revisions 55 and 56
Revision 55 as of 2018-06-30 05:13:54
Size: 3139
Comment:
Revision 56 as of 2019-02-20 02:03:26
Size: 3165
Comment:
Deletions are marked like this. Additions are marked like this.
Line 42: Line 42:
username:

password:

The 40m has two networks: the LIGO general computing network and an internal "martian" network.

LIGO Caltech network

  • IP addresses on this network are in the form 131.215.114.XXX and 131.215.115.XXX .

  • The wireless router connected to the caltech net has hidden SSID "40m" (2GHz), "40m5G1" and "40m5G2" (5GHz). The router is nominally located on the top of the computer rack in the office area.

Martian network

  • IP addresses on the martian network are in the form 192.168.113.XXX

  • The wireless network is on the martian network.

Gateway

192.168.113.2

netmask

255.255.255.0

nameserver

192.168.113.104

nameserver

131.215.125.1

nameserver

131.215.139.100

nameserver

131.215.254.99

  • The new net router installed Jun 27, 2018 is controlling all the traffic between the GC net and the martian net.
    • The net router has the outside IP of 131.215.115.200, and internal IP of 192.168.113.2
    • It transmits all the trafic from inside to outside, but does only particular access from outside.
    • nodus.ligo.caltech.edu is now the alias of 131.315.115.200.
    • To ssh to one of the martian computers from a GC computer, ssh into controls@nodus, then use name (or name.martian) for the name. i.e.ssh pianosa.martian 

    • NAT Router setting page: FirewallSetting

  • See the Martian host table for IP address assignments on the martian network.

    • When you want to add a new host to the Martian network read this.

Martian Wireless Network

Wifi router

On Jan 6th, 2016, the Martian wifi router was replaced with a Netgear R6400. Link to the corresponding ELOG entry

The router supports a 2 GHz network (11g) named "40MARS" and a 5 GHz network (11ac) "40MARS_5G". These two SSIDs are hidden.

The martian IP address of this unit is 192.168.113.232.

username:

password:

Wireless Bridge for GPIB instruments

On Jan 8th, 2016, a new wireless bridge (NETGEAR EX3700) for GPIB instruments was installed.

Device Name: EX3700_1, Fixed IP: 192.168.113.233

It accepts ethernet (wired) devices with fixed IP of 192.168.113.XXX

How_To_Configure_NETGEAR_EX3700

Nameserver and DHCP

chiara runs the DNS and DHCP for the Martian network, set up largely in the manner detailed in this website.

Configuration files can be found at

chiara:/etc/bind/named.conf.local
chiara:/etc/dhcp/dhcpd.conf

and other files in those same directories.

Mount NFS filesystem

If you want to mount the /cvs/cds NFS filesystem on a computer already on the martian network, add the following line to the file /etc/fstab

chiara:/home/cds              /cvs/cds        nfs     rw,bg,nfsvers=3

Then make the directory where the /cvs/cds dir will be mounted, mount the filesystem via

mkdir -p /cvs/cds
sudo mount /cvs/cds

Network (last edited 2021-08-19 09:54:10 by AnchalguptaATligoDOTorg)