|
Size: 2627
Comment:
|
Size: 3087
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 6: | Line 6: |
. The wireless router connected to the caltech net has hidden SSID "40m" (2GHz), "40m5G1" and "40m5G2" (5GHz). The router is nominally located on the top of the computer rack in the office area. |
|
| Line 20: | Line 22: |
| . The new net router installed Jun 27, 2018 is controlling all the traffic between the GC net and the martian net. . The net router has the outside IP of 131.215.115.200, and internal IP of 192.168.113.2 . It transmits all the trafic from inside to outside, but does only particular access from outside. . nodus.ligo.caltech.edu is now the alias of 131.315.115.200. . To ssh to one of the martian computers from a GC computer, ssh into `controls@nodus`, then use `name` (or `name.martian`) for the name. i.e.{{{ssh pianosa.martian }}} |
|
| Line 21: | Line 29: |
| . When you want to add a new host to the Martian network [[CDS/How_to_join_martian | read this]]. | |
| Line 22: | Line 31: |
| . When you want to add a new host to the Martian network [[CDS/How_to_join_martian | read this]]. | == Martian Wireless Network == |
| Line 24: | Line 33: |
| . To ssh to one of the martian computers from a GC computer, ssh into `controls@nodus`, then use `name` (or `name.martian`) for the name. i.e.{{{ssh pianosa.martian }}} . Note that all the access from outside should go through nodus, while the connection from inside to outside is gatewayed by the NAT router (192.168.113.2). == Wireless Network == |
=== Wifi router === |
| Line 36: | Line 41: |
| == Wireless Bridge for GPIB instruments == | === Wireless Bridge for GPIB instruments === |
| Line 57: | Line 62: |
The 40m has two networks: the LIGO general computing network and an internal "martian" network.
LIGO Caltech network
IP addresses on this network are in the form 131.215.114.XXX and 131.215.115.XXX .
- The wireless router connected to the caltech net has hidden SSID "40m" (2GHz), "40m5G1" and "40m5G2" (5GHz). The router is nominally located on the top of the computer rack in the office area.
Martian network
IP addresses on the martian network are in the form 192.168.113.XXX
- The wireless network is on the martian network.
Gateway |
192.168.113.2 |
netmask |
255.255.255.0 |
nameserver |
192.168.113.104 |
nameserver |
131.215.125.1 |
nameserver |
131.215.139.100 |
nameserver |
131.215.254.99 |
- The new net router installed Jun 27, 2018 is controlling all the traffic between the GC net and the martian net.
- The net router has the outside IP of 131.215.115.200, and internal IP of 192.168.113.2
- It transmits all the trafic from inside to outside, but does only particular access from outside.
- nodus.ligo.caltech.edu is now the alias of 131.315.115.200.
To ssh to one of the martian computers from a GC computer, ssh into controls@nodus, then use name (or name.martian) for the name. i.e.ssh pianosa.martian
See the Martian host table for IP address assignments on the martian network.
When you want to add a new host to the Martian network read this.
Martian Wireless Network
Wifi router
On Jan 6th, 2016, the Martian wifi router was replaced with a Netgear R6400. Link to the corresponding ELOG entry
The router supports a 2 GHz network (11g) named "40MARS" and a 5 GHz network (11ac) "40MARS_5G". These two SSIDs are hidden.
The martian IP address of this unit is 192.168.113.232.
Wireless Bridge for GPIB instruments
On Jan 8th, 2016, a new wireless bridge (NETGEAR EX3700) for GPIB instruments was installed.
Device Name: EX3700_1, Fixed IP: 192.168.113.233
It accepts ethernet (wired) devices with fixed IP of 192.168.113.XXX
How_To_Configure_NETGEAR_EX3700
Nameserver and DHCP
chiara runs the DNS and DHCP for the Martian network, set up largely in the manner detailed in this website.
Configuration files can be found at
chiara:/etc/bind/named.conf.local chiara:/etc/dhcp/dhcpd.conf
and other files in those same directories.
Mount NFS filesystem
If you want to mount the /cvs/cds NFS filesystem on a computer already on the martian network, add the following line to the file /etc/fstab
chiara:/home/cds /cvs/cds nfs rw,bg,nfsvers=3
Then make the directory where the /cvs/cds dir will be mounted, mount the filesystem via
mkdir -p /cvs/cds sudo mount /cvs/cds