|
Size: 2885
Comment: English cleanup
|
Size: 2381
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 62: | Line 62: |
== Firewalling by Router:WRT310N == . A firewall is used for network isolation between new CDS computers and the existing CDS system. It avoids network conflicts. For this purpose, a network router: ''LINKSYS WRT310N'' is used. || '''network address''' || 192.168.113.178 || || || '''internal address'''|| 192.168.1.1 || || || ''' DHCP address ''' || 192.168.1.100-150|| currently disabled || . Anyone can log in to the router by any web browser. The login password is set to {{{admin}}}. |
The 40m has two networks: the LIGO general computing network and an internal "martian" network.
LIGO Caltech network
IP addresses on this network are in the form 131.215.114.XXX
Martian network
IP addresses on the martian network are in the form 192.168.113.XXX
- The wireless network is on the martian network.
Gateway |
192.168.113.2 |
netmask |
255.255.255.0 |
nameserver |
192.168.113.104 |
nameserver |
131.215.125.1 |
nameserver |
131.215.139.100 |
nameserver |
131.215.254.99 |
See the Martian host table for IP address assignments on the martian network.
When you want to add a new host to the Martian network read this.
To ssh to one of the martian computers from a GC computer, ssh into controls@nodus, then use name (or name.martian) for the name. i.e.
ssh pianosa.martian
Wireless Network
On Jan 6th, 2016, the Martian wifi router was replaced with a Netgear R6400. Link to the corresponding ELOG entry
The router supports a 2 GHz network (11g) named "40MARS" and a 5 GHz network (11ac) "40MARS_5G". These two SSIDs are hidden.
Wireless Bridge for GPIB instruments
On Jan 8th, 2016, a new wireless bridge (NETGEAR EX3700) for GPIB instruments was installed.
Device Name: EX3700_1, Fixed IP: 192.168.113.233
It accepts ethernet (wired) devices with fixed IP of 192.168.113.XXX
How_To_Configure_NETGEAR_EX3700
Nameserver and DHCP
chiara runs the DNS and DHCP for the Martian network, set up largely in the manner detailed in this website.
Configuration files can be found at
chiara:/etc/bind/named.conf.local chiara:/etc/dhcp/dhcpd.conf
and other files in those same directories.
Mount NFS filesystem
If you want to mount the /cvs/cds NFS filesystem on a computer already on the martian network, add the following line to the file /etc/fstab
chiara:/home/cds /cvs/cds nfs rw,bg,nfsvers=3
Then make the directory where the /cvs/cds dir will be mounted, mount the filesystem via
mkdir -p /cvs/cds sudo mount /cvs/cds