Differences between revisions 7 and 8
⇤ ← Revision 7 as of 2010-08-12 05:29:33 →
Size: 1532
Editor: NancyAggarwal
Comment:
← Revision 8 as of 2012-01-03 23:02:43 → ⇥
Size: 1631
Editor: localhost
Comment: converted to 1.6 markup
Deletions are marked like this. Additions are marked like this.
Line 11: Line 11:
 * Verify the QPD TF from the circuit diagram - done. attachment:green.png
 * Calculate the alignment sensitivity matrix - in progress attachment:orange.png
  * Calculation of Matrices for each element of teh MC attachment:green.png
  * Use them to find the Matrix for the mode cleaner attachment:orange.png
  * Find the Cavity axis and MC2 spot position using that - attachment:red.png
  * Find the matrix relating Cavity axis mis-alignment and mirror misalignment attachment:red.png
  * Find the matrix/relation between Cavity axis mis-alignment and WFS signals attachment:red.png
 * Find a proper mount and case for the QPD attachment:green.png
 * Make own diagrams for cavity and the WFS block attachment:green.png
 * Write the 2nd progress report. attachment:green.png		  * Verify the QPD TF from the circuit diagram - done. {{attachment:green.png}}
 * Calculate the alignment sensitivity matrix - in progress {{attachment:orange.png}}
  * Calculation of Matrices for each element of teh MC {{attachment:green.png}}
  * Use them to find the Matrix for the mode cleaner {{attachment:orange.png}}
  * Find the Cavity axis and MC2 spot position using that - {{attachment:red.png}}
  * Find the matrix relating Cavity axis mis-alignment and mirror misalignment {{attachment:red.png}}
  * Find the matrix/relation between Cavity axis mis-alignment and WFS signals {{attachment:red.png}}
 * Find a proper mount and case for the QPD {{attachment:green.png}}
 * Make own diagrams for cavity and the WFS block {{attachment:green.png}}
 * Write the 2nd progress report. {{attachment:green.png}}
Line 24: Line 24:
 * Install the QPD properly, with centering. attachment:green.png
 * Measure the QPD TF - done attachment:green.png
 * Characterize the QPD - done attachment:green.png		  * Install the QPD properly, with centering. {{attachment:green.png}}
 * Measure the QPD TF - done {{attachment:green.png}}
 * Characterize the QPD - done {{attachment:green.png}}
Line 28: Line 28:
  * Written the script attachment:green.png
  * Run the script and measure when everything is set-up attachment:green.png		   * Written the script {{attachment:green.png}}
  * Run the script and measure when everything is set-up {{attachment:green.png}}
Line 31: Line 31:
 * Do noise analysis attachment:red.png  * Do noise analysis {{attachment:red.png}}
Line 35: Line 35:
<<FullSearch()>> <<FullSearch>>

Checklist for Nancy

1. Non-experimental

  • Verify the QPD TF from the circuit diagram - done. green.png

  • Calculate the alignment sensitivity matrix - in progress orange.png

    • Calculation of Matrices for each element of teh MC green.png

    • Use them to find the Matrix for the mode cleaner orange.png

    • Find the Cavity axis and MC2 spot position using that - red.png

    • Find the matrix relating Cavity axis mis-alignment and mirror misalignment red.png

    • Find the matrix/relation between Cavity axis mis-alignment and WFS signals red.png

  • Find a proper mount and case for the QPD green.png

  • Make own diagrams for cavity and the WFS block green.png

  • Write the 2nd progress report. green.png

2. Experimental

  • Install the QPD properly, with centering. green.png

  • Measure the QPD TF - done green.png

  • Characterize the QPD - done green.png

  • Measure the alignment sensitivity matrix

    • Written the script green.png

    • Run the script and measure when everything is set-up green.png

  • Do noise analysis red.png

List of pages in this category:


Display context of search results
Case-sensitive searching

Mode_Cleaner_Work:_Simulation_and_Improved_Wave_Front_Sensors (last edited 2012-01-03 23:02:43 by localhost)