Checklist for Nancy
1. Non-experimental
Verify the QPD TF from the circuit diagram - done.
Calculate the alignment sensitivity matrix - in progress
Calculation of Matrices for each element of teh MC
Use them to find the Matrix for the mode cleaner
Find the Cavity axis and MC2 spot position using that -
Find the matrix relating Cavity axis mis-alignment and mirror misalignment
Find the matrix/relation between Cavity axis mis-alignment and WFS signals
Find a proper mount and case for the QPD
Make own diagrams for cavity and the WFS block
Write the 2nd progress report.
2. Experimental
Install the QPD properly, with centering.
Measure the QPD TF - done
Characterize the QPD - done
- Measure the alignment sensitivity matrix
Written the script
Run the script and measure when everything is set-up
Do noise analysis
List of pages in this category: