Differences between revisions 2 and 16 (spanning 14 versions)

<<TableOfContents: execution failed [Argument "maxdepth" must be an integer value, not "[maxdepth]"] (see also the log)>>

finesse code. Use mkat for running

Power budget

DRFPMI

- The modulation depths of 0.1 was assumed.

- Loss of 50ppm per bounce was assumed. => Arm cavity reflectivity 96.8%

- Power Recycling Gain: Carrier: 28, f1: 68, f2: 21

-  ⇤ ← Revision 2 as of 2011-01-01 07:07:16 → 
  Size: 55
  Editor: KojiArai
  Comment:
+   ← Revision 16 as of 2012-01-03 23:02:37 → ⇥
  Size: 1049
  Editor: localhost
  Comment: converted to 1.6 markup
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
+<<TableOfContents([maxdepth])>>

----

[[attachment:model_40m_power_budget_test.kat|finesse code]]. Use mkat for running
-Line 2:
+Line 8:
+== DRFPMI ==
{{attachment:40m_power_budget.png}}
-Line 3:
+Line 11:
-[attachment:40m_power_budget.png]
+- The modulation depths of 0.1 was assumed.

- Loss of 50ppm per bounce was assumed. => Arm cavity reflectivity 96.8%

'''- Power Recycling Gain: Carrier: 28, f1: 68, f2: 21'''

=== Optical transfer functions ===
{{attachment:power_budget_DRFPMI_run1.png}}
{{attachment:power_budget_DRFPMI_run2.png}}

== FPMI ==
{{attachment:40m_power_budget_FPMI.png}}

=== Optical transfer functions ===
{{attachment:power_budget_FPMI_run1.png}}
{{attachment:power_budget_FPMI_run2.png}}

== DRMI ==
{{attachment:40m_power_budget_DRMI.png}}

=== Optical transfer functions ===
{{attachment:power_budget_DRMI_run1.png}}
{{attachment:power_budget_DRMI_run2.png}}

== PRMI ==
{{attachment:40m_power_budget_PRMI.png}}

=== Optical transfer functions ===
{{attachment:power_budget_PRMI_run1.png}}
{{attachment:power_budget_PRMI_run2.png}}