Diff for "How_To/Restart_the_elog"

Differences between revisions 8 and 10 (spanning 2 versions)

We're using the [https://midas.psi.ch/elog/ Electronic Logbook] software by [https://midas.psi.ch/~stefan/ Steffan Ritt].

The elog is installed on Nodus under /cvs/cds/caltech/elog/elog-2.7.5/.

It can be accessed from either the address: http://nodus.ligo.caltech.edu:8080/40m/ or from the old one on Dziban http://dziban.ligo.caltech.edu:40/40m/.

The elog runs on background in Nodus.

To kill the process, ssh nodus and then enter:

1) pkill -3 elogd

2) rm -f /var/run/elogd.pid

To restart it enter:

./elogd -p 8080 -c /cvs/cds/caltech/elog/elog-2.7.5/elogd.cfg -D

FCKeditor

A little subprogram called FCKeditor is responsible for the text editor interface that appears when the HTML encoding is chosen as a way to write/edit an entry.
If the make command is used to compile the elog, the FCKeditor fails to be installed.
In that case, during the installation fo the elog, one has just to go inside the path /cvs/cds/caltech/elog/elog-2.7.5/scripts/ and simply unzip the file fckeditor.zip. That's it.

-  ⇤ ← Revision 8 as of 2009-10-14 23:39:59 → 
  Size: 1036
  Editor: AlbertoStochino
  Comment:
+   ← Revision 10 as of 2009-10-14 23:41:58 → ⇥
  Size: 1080
  Editor: AlbertoStochino
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 9:
-To kill the process, ssh nodus and then enter:
+''''''To kill the process''''', ssh nodus and then enter:
 Line 15:
-To restart it enter:
+'''''To restart it''''' enter:
 Line 19:
-=== FCKeditor ===
+==== FCKeditor ====
 Line 24:
-In that case, during the installation fo the elog, one has just to go inside the path xxx/elog.xxx/scripts/ and simply unzip the file ''fckeditor.zip''. That's it
+In that case, during the installation fo the elog, one has just to go inside the path /cvs/cds/caltech/elog/elog-2.7.5/scripts/ and simply unzip the file ''fckeditor.zip''. That's it.