Diff for "Electronics/Multi_Resonant_EOM"

Differences between revisions 6 and 13 (spanning 7 versions)

Overview

A set of phase modulation sidebands are imposed to the main laser beam for control of the mode cleaner cavity and the main interferometer. The frequency of the sidebands are determined from the signal extraction and control scheme: 11MHz, 23.5MHz, and 55MHz.
We are investigating a multiply resonant circuit to be attached to EOM in order to create those three pairs of sidebands with a single crystal.
(What is motivation? Why single crystal? Why three eoms are not enough? Why triple electrode EOM is not enough?)
The feasibility and the basic ideas of the triple resonant circuit was investigated by Stephanie Erickson, a 40m SURF student in 2009 Summer. Link to Stephanie's descriptions (What did she demonstrated?)

Schedules

study of LC + transformer
investigation of loss
make LC circuit with highest impedance
make a new transformer for matching the impedance of LC circuit
performance test by using optical spectrum analyzer
study of triple resonance circuit
investigation of loss effect
make triple resonant circuit with highest impedances
make a new transformer
performance test by optical analyzer
order company-qualified circuit
performance test
install

tablewidth="200px" tablealign="center"schedule

-  ⇤ ← Revision 6 as of 2009-12-04 06:27:06 → 
  Size: 219
  Editor: KojiArai
  Comment: Incorporate into upgrade pages
+   ← Revision 13 as of 2009-12-17 07:38:04 → ⇥
  Size: 1400
  Editor: KiwamuIzumi
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 4:
- . In order to create the sidebands with three frequencies (11MHz, 23.5MHz, 55MHz) we decided to use the multiply resonant EOM driver. The driver is composed by a
+ . A set of phase modulation sidebands are imposed to the main laser beam for control of the mode cleaner cavity and the main interferometer. The frequency of the sidebands are determined from the signal extraction and control scheme: 11MHz, 23.5MHz, and 55MHz.

 . We are investigating a multiply resonant circuit to be attached to EOM in order to create those three pairs of sidebands with a single crystal.

 . (What is motivation? Why single crystal? Why three eoms are not enough? Why triple electrode EOM is not enough?)

 . 

 . The feasibility and the basic ideas of the triple resonant circuit was investigated by Stephanie Erickson, a 40m SURF student in 2009 Summer. [[Multiply Resonant EOM|Link to Stephanie's descriptions]] (What did she demonstrated?)

'''Schedules'''

 * study of LC + transformer
 * investigation of loss
 * make LC circuit with highest impedance
 * make a new transformer for matching the impedance of LC circuit
 * performance test by using optical spectrum analyzer
 * study of triple resonance circuit
 * investigation of loss effect
 * make triple resonant circuit with highest impedances
 * make a new transformer
 * performance test by optical analyzer
 * order company-qualified circuit
 * performance test

 * install 

||||'''tablewidth="200px" tablealign="center"schedule'''||
|| || ||
|| || ||
|| || ||