Differences between revisions 2 and 8 (spanning 6 versions)
Revision 2 as of 2009-11-26 01:31:05
Size: 120
Comment:
Revision 8 as of 2009-12-04 06:39:11
Size: 791
Editor: KojiArai
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
Here Kiwamu will write how he solved the problem of matching the power required to drive the new broadband EOM driver! ## page was renamed from EOM driver

'''Overview'''

 . A set of phase modulation sidebands are imposed to the main laser beam for control of the mode cleaner cavity and the main interferometer. The frequency of the sidebands are determined from the signal extraction and control scheme: 11MHz, 23.5MHz, and 55MHz.

 . We are investigating a multiply resonant circuit to be attached to EOM in order to create those three pairs of sidebands with a single crystal.

 . (What is motivation? Why single crystal? Why three eoms are not enough? Why triple electrode EOM is not enough?)

 . The feasibility and the basic ideas of the triple resonant circuit was investigated by Stephanie Erickson, a 40m SURF student in 2009 Summer. [Multiply Resonant EOM] (What did she demonstrated?)

Overview

  • A set of phase modulation sidebands are imposed to the main laser beam for control of the mode cleaner cavity and the main interferometer. The frequency of the sidebands are determined from the signal extraction and control scheme: 11MHz, 23.5MHz, and 55MHz.
  • We are investigating a multiply resonant circuit to be attached to EOM in order to create those three pairs of sidebands with a single crystal.
  • (What is motivation? Why single crystal? Why three eoms are not enough? Why triple electrode EOM is not enough?)
  • The feasibility and the basic ideas of the triple resonant circuit was investigated by Stephanie Erickson, a 40m SURF student in 2009 Summer. [Multiply Resonant EOM] (What did she demonstrated?)

Electronics/Multi_Resonant_EOM (last edited 2017-01-25 22:48:38 by GautamvenugopalanATligoDOTorg)