Differences between revisions 13 and 14
Revision 13 as of 2009-12-17 07:38:04
Size: 1400
Editor: KiwamuIzumi
Comment:
Revision 14 as of 2009-12-17 07:45:39
Size: 1341
Editor: KiwamuIzumi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 14: Line 14:
'''Schedules''' '''Steps for Development'''
Line 16: Line 16:
 * study of LC + transformer
 * investigation of loss
 * study of LC + transformer {OK}
 * investigation of loss effect {OK}
Line 29: Line 29:
 * install

||||'''tablewidth="200px" tablealign="center"schedule'''||
|| || ||
|| || ||
|| || ||
 * install

Overview

  • A set of phase modulation sidebands are imposed to the main laser beam for control of the mode cleaner cavity and the main interferometer. The frequency of the sidebands are determined from the signal extraction and control scheme: 11MHz, 23.5MHz, and 55MHz.
  • We are investigating a multiply resonant circuit to be attached to EOM in order to create those three pairs of sidebands with a single crystal.
  • (What is motivation? Why single crystal? Why three eoms are not enough? Why triple electrode EOM is not enough?)
  • The feasibility and the basic ideas of the triple resonant circuit was investigated by Stephanie Erickson, a 40m SURF student in 2009 Summer. Link to Stephanie's descriptions (What did she demonstrated?)

Steps for Development

  • study of LC + transformer {OK}

  • investigation of loss effect {OK}

  • make LC circuit with highest impedance
  • make a new transformer for matching the impedance of LC circuit
  • performance test by using optical spectrum analyzer
  • study of triple resonance circuit
  • investigation of loss effect
  • make triple resonant circuit with highest impedances
  • make a new transformer
  • performance test by optical analyzer
  • order company-qualified circuit
  • performance test
  • install

Electronics/Multi_Resonant_EOM (last edited 2017-01-25 22:48:38 by GautamvenugopalanATligoDOTorg)