Differences between revisions 52 and 71 (spanning 19 versions)

September CDS plan

Major Missions

Complete damping of the vertex suspensions
Preparation for Green locking
Simulated plants

Useful Links

category	description	Links
plans and overviews	CDS home page	Upgrade_09/CDS
	CDS plan for August	Upgrade_09/CDS/August_CDS_test
	Simulated Plant	Simulated_Plant
Lists	Current Hardware Lists	Upgrade_09/CDS/current_hardware
Lists	Channel Assignments for C1SUS	Upgrade_09/CDS/Suspension_wiring_to_channels
Technical Notes	Notes about CDS realtime code	Notes_on_getting_the_CDS_Realtime_Code_Generator_working
	Notes for Green Locking interface to realtime code	Notes_for_Green_locking_interface_to_RCG
	Notes for Simulated Plant	Notes_for_the_RCG_40m_simulated_plant

PLANS

TO DO LIST

complete

intermediate state

incomplete

gave up
A. Complete suspension damping keeping in mind Version B coils. (1-2 days?)
- ADC break out boards
  - design an adapter box for the breakout boards
  - make the box and install it
- Binary Output working on c1sus (Alex/Joe) 1-2 days
  - rearrange the channel assignments
  - test all the BO channels and their assignments
  - Switching over cabling from the current XY220's to the new system
- damping test with the BOs
  - damping all the vertex suspensions with the new CDS
  - check if the binary outputs are working
  - make the daq daemon work
- refinement of the control model
  - renewal of realtime control model
  - renewal of medm screens for the vertex suspensions
  - separate optics into some realtime models instead of one model in order to avoid run time issues
- misc.
  - fix feCodeGen.pl script

B. Preparation for Green Locking
- Get RFM working (3-4 days)
  - make a new IPC parser
  - string the RFM optical fiber connecting C1SUS and C1ISCEX
  - switching the RFM old network to that of the new one by using the RFM bypath
  - install PCI-5565 driver if it's necessary
  - test the RFM card by running the diagnostic script
  - test the RFM with the epics
- Get both end stations working
  - Check we have correct number of cables
  - Check if both end stations are correctly running
- Get IOO front end machine working
  - Move the computer into 1X2 rack
  - remove Marconi(?) and put a new IO chassis on 1X2 rack
  - check timing/ADC/DAC on the IO chassis. And make it works (5 days)
- Fix non-working IO chassis
  - Check on fiber with Rolf for LSC
  - timing/ADC/DAC check
C. Simulated Plant
- Simulated Green Locking
  - conceptual design
  - make realtime simlink model
  - compile and install the model
- LSC simulated plant
  - conceptual design
  - make realtime simlink model
  - compile and install the model
- SUS simulated plant
  - renew the model with the new CDS parts
  - compile and install the model

D. Frame builder
- rebuild frame builder
  - rebuild the frame builder by Gentoo OS
  - get dataviewer working
  - install a heavy duty DAQ router
- diskless boot
  - diskless boot seetings on the frame builder
  - run the front end machines with Gentoo realtime core
  - run a realtime code on a new realtime Gentoo

PSL Racks Setup

New rack setup in pdf form 1X1_1X2_racks.pdf

WISH LIST

(not urgent things, but somethings we want to implement at some points)

channel wiki
wiki hyperlink on a medm screen

TIME LINE SCHEDULE

Put time line schedule here.

DETAILED CONSIDERATIONs

Cable Requirements

Do we have sufficient number of the cables ?
Let's doublecheck it.
Current Hardwares Lists

Notes about Binary Outputs

To obtain a voltage signal, a pull-up resister and a DC voltage are needed at the receiver stage because the signal is generated with a transistor.
An easy way to check this BO system is putting an LED on the receiver stage as described in the figure below. In this case if the signal is ON the LED lights up and vice versa.

normal operation

test configuration
A datasheet for the BO card is here contec32BO.pdf

-  ⇤ ← Revision 52 as of 2010-09-08 19:48:36 → 
  Size: 5135
  Editor: KiwamuIzumi
  Comment:
+   ← Revision 71 as of 2012-01-03 23:02:37 → ⇥
  Size: 6685
  Editor: localhost
  Comment: converted to 1.6 markup
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
+## page was renamed from Upgrade 09/CDS/September CDS plan
-Line 9:
+Line 10:
-[[BR]]
+<<BR>>
-Line 13:
+Line 14:
-||<|3> plans and overviews|| ''' CDS home page ''' || [:Upgrade_09/CDS] ||
|| ''' CDS plan for August ''' || [:Upgrade_09/CDS/August_CDS_test] ||
|| ''' Simulated Plant''' ||[:Simulated_Plant] ||
||<|2> Lists || ''' Current Hardware Lists ''' || [:Upgrade_09/CDS/current_hardware] ||
|| ''' Channel Assignments for C1SUS ''' || [:Upgrade_09/CDS/Suspension_wiring_to_channels] ||
||<|3> Technical Notes || ''' Notes about CDS realtime code ''' || [:Notes_on_getting_the_CDS_Realtime_Code_Generator_working] ||
|| ''' Notes for Green Locking interface to realtime code ''' || [:Notes_for_Green_locking_interface_to_RCG] ||
|| ''' Notes for Simulated Plant ''' ||[:Notes_for_the_RCG_40m_simulated_plant] ||
+||<|3> plans and overviews|| ''' CDS home page ''' || [[Upgrade_09/CDS]] ||
|| ''' CDS plan for August ''' || [[Upgrade_09/CDS/August_CDS_test]] ||
|| ''' Simulated Plant''' ||[[Simulated_Plant]] ||
||<|2> Lists || ''' Current Hardware Lists ''' || [[Upgrade_09/CDS/current_hardware]] ||
|| ''' Channel Assignments for C1SUS ''' || [[Upgrade_09/CDS/Suspension_wiring_to_channels]] ||
||<|3> Technical Notes || ''' Notes about CDS realtime code ''' || [[Notes_on_getting_the_CDS_Realtime_Code_Generator_working]] ||
|| ''' Notes for Green Locking interface to realtime code ''' || [[Notes_for_Green_locking_interface_to_RCG]] ||
|| ''' Notes for Simulated Plant ''' ||[[Notes_for_the_RCG_40m_simulated_plant]] ||
-Line 23:
+Line 24:
-[[BR]]
+<<BR>>
-Line 27:
+Line 28:
- || attachment:green.png '''complete'''|| attachment:orange.png '''intermediate state ''' || attachment:red.png '''incomplete''' || attachment:black.png gave up||
+ || {{attachment:green.png}} '''complete'''|| {{attachment:orange.png}} '''intermediate state ''' || {{attachment:red.png}} '''incomplete''' || {{attachment:black.png}} gave up||
-Line 29:
+Line 30:
- [[BR]]
+ <<BR>>
-Line 32:
+Line 33:
-     . attachment:red.png design an adapter box for the breakout boards
     . attachment:red.png make the box and install it
+     . {{attachment:orange.png}} design an adapter box for the breakout boards
     . {{attachment:red.png}} make the box and install it
-Line 35:
+Line 36:
-     . attachment:orange.png test all the BO channels and their assignments
     . attachment:red.png Switching over cabling from the current XY220's to the new system
+     . {{attachment:orange.png}} rearrange the channel assignments
     . {{attachment:orange.png}} test all the BO channels and their assignments
     . {{attachment:green.png}} Switching over cabling from the current XY220's to the new system
-Line 38:
+Line 40:
-     . attachment:green.png  damping all the vertex suspensions with the new CDS
     . attachment:red.png check if the binary outputs are working
     . attachment:red.png make the daq daemon work
+     . {{attachment:green.png}}  damping all the vertex suspensions with the new CDS
     . {{attachment:green.png}} check if the binary outputs are working
     . {{attachment:orange.png}} make the daq daemon work
-Line 42:
+Line 44:
-     . attachment:red.png renewal of realtime control model
     . attachment:red.png renewal of medm screens for the vertex suspensions
+     . {{attachment:green.png}} renewal of realtime control model
     . {{attachment:orange.png}} renewal of medm screens for the vertex suspensions
     . {{attachment:orange.png}} separate optics into some realtime models instead of one model in order to avoid run time issues
-Line 45:
+Line 48:
-     . attachment:orange.png fix {{{ feCodeGen.pl }}} script
[[BR]]
+     . {{attachment:green.png}} fix {{{ feCodeGen.pl }}} script
<<BR>>
-Line 49:
+Line 52:
-     . attachment:green.png make a new IPC parser 
     . attachment:green.png string the RFM optical fiber connecting C1SUS and C1ISCEX
     . attachment:orange.png install PCI-5565 driver on c1sus
     . attachment:red.png install PCI-5565 driver on c1iscex
     . attachment:red.png test the RFM card by running the diagnostic script on the individually
     . attachment:red.png test the RFM with the epics
+     . {{attachment:green.png}} make a new IPC parser 
     . {{attachment:green.png}} string the RFM optical fiber connecting C1SUS and C1ISCEX
     . {{attachment:green.png}} switching the RFM old network to that of the new one by using the RFM bypath
     . {{attachment:green.png}} install PCI-5565 driver if it's necessary
     . {{attachment:orange.png}} test the RFM card by running the diagnostic script
     . {{attachment:orange.png}} test the RFM with the epics
-Line 58:
+Line 61:
-     . attachment:red.png Check we have correct number of cables (again tomorrow).
     . attachment:red.png Check if both end stations are correctly running
+     . {{attachment:red.png}} Check we have correct number of cables
     . {{attachment:green.png}} Check if both end stations are correctly running
-Line 62:
+Line 65:
-     . attachment:red.png Move the computer into 1X2 rack
     . attachment:red.png remove Marconi(?) and put a new IO chassis on 1X2 rack
     . attachment:red.png check timing/ADC/DAC on the IO chassis. And make it works (5 days)
+     . {{attachment:green.png}} Move the computer into 1X2 rack
     . {{attachment:green.png}} remove Marconi(?) and put a new IO chassis on 1X2 rack
     . {{attachment:green.png}} check timing/ADC/DAC on the IO chassis. And make it works (5 days)
-Line 66:
+Line 69:
-     . attachment:red.png  Check on fiber with Rolf for LSC
     . attachment:red.png timing/ADC/DAC check
+     . {{attachment:green.png}}  Check on fiber with Rolf for LSC
     . {{attachment:green.png}} timing/ADC/DAC check
-Line 69:
+Line 72:
- [[BR]]
+ <<BR>>
-Line 73:
+Line 76:
-     . attachment:red.png conceptual design
     . attachment:red.png make realtime simlink model
     . attachment:red.png compile and install the model
+     . {{attachment:green.png}} conceptual design
     . {{attachment:green.png}} make realtime simlink model
     . {{attachment:orange.png}} compile and install the model
-Line 78:
+Line 81:
-     . attachment:green.png conceptual design 
     . attachment:green.png make realtime simlink model
     . attachment:orange.png compile and install the model
   . ''' Gentoo patch ''' (not high priority)
+     . {{attachment:green.png}} conceptual design 
     . {{attachment:green.png}} make realtime simlink model
     . {{attachment:orange.png}} compile and install the model

   . ''' SUS simulated plant '''
     . {{attachment:red.png}} renew the model with the new CDS parts
     . {{attachment:red.png}} compile and install the model

<<BR>>
 . '''D. Frame builder ''' 
   . ''' rebuild frame builder'''    
     . {{attachment:green.png}} rebuild the frame builder by Gentoo OS
     . {{attachment:orange.png}} get dataviewer working
     . {{attachment:green.png}} install a heavy duty DAQ router 
   . ''' diskless boot '''
     . {{attachment:orange.png}} diskless boot seetings on the frame builder
     . {{attachment:orange.png}} run the front end machines with Gentoo realtime core
     . {{attachment:green.png}} run a realtime code on a new realtime Gentoo
-Line 84:
+Line 101:
-[[BR]]
[[BR]]
+<<BR>>
<<BR>>

== PSL Racks Setup ==

{{attachment:1X1_1X2_racks.png}} 

New rack setup in pdf form  [[attachment:1X1_1X2_racks.pdf]]
-Line 94:
+Line 117:
-[[BR]]
[[BR]]
+<<BR>>
<<BR>>
-Line 100:
+Line 123:
-[[BR]]
[[BR]]
+<<BR>>
<<BR>>
-Line 110:
+Line 133:
- . {i} [[Upgrade_09/CDS/current_hardware|Current Hardwares Lists]]
+ . {i} [[Upgrade_09/CDS/current_hardware| Current Hardwares Lists]]
-Line 112:
+Line 135:
-[[BR]]
[[BR]]
+<<BR>>
<<BR>>
-Line 120:
+Line 143:
- [[BR]]
+ <<BR>>
-Line 123:
+Line 146:
- || <<ImageLink(BO_final.png, void, height=260)>> || <<ImageLink(BO_test.png, void, height=260)>> ||
+ || [[void|{{attachment:BO_final.png||height=260}}]] || [[void|{{attachment:BO_test.png||height=260}}]] ||
-Line 126:
+Line 149:
- . A datasheet for the BO card is here attachment:contec32BO.pdf
+ . A datasheet for the BO card is here [[attachment:contec32BO.pdf]]
-Line 128:
+Line 151:
-[[BR]]
[[BR]]
+<<BR>>
<<BR>>
-Line 137:
+Line 160:
-[[BR]]
[[BR]]
+<<BR>>
<<BR>>
-Line 142:
+Line 165:
- . Concept
+=== Conceptual Design ===
-Line 144:
+Line 167:
- . Model construction
+ . [[void|{{attachment:green_sm.png||height=340}}]]
-Line 146:
+Line 169:
-[[BR]]
[[BR]]
+ . [[void|{{attachment:green_simlated_plant.png||height=340}}]]

=== Model construction ===


<<BR>>
<<BR>>
-Line 150:
+Line 179:
-[[BR]]
[[BR]]
+<<BR>>
<<BR>>

September CDS plan

Major Missions

Useful Links

PLANS

TO DO LIST

PSL Racks Setup

WISH LIST

TIME LINE SCHEDULE

DETAILED CONSIDERATIONs

Cable Requirements

Notes about Binary Outputs

Reflective Memory Network

Simulated Plant for Green locking

Conceptual Design

Model construction

Gain Mismatch

normal operation	test configuration