Dolphin Switch
8 port IX Switch
Network configuration
IP address: 192.168.113.40 Web access authentication: admin / admin
Port Assignment
1 c1sus
2 c1lsc
3 c1iscex
4 c1iscey
5 c1ioo
6 c1sus2
7 NC
8 NC
How to restart an RTS machine without crashing other RTS
- Suppose you have one (or multiple) machines are dead (freeze, dolphin glitch, DK, etc).
- From the following list, determine which host you want to restart:
PORT/HOST
1 c1sus
2 c1lsc
3 c1iscex
4 c1iscey
5 c1ioo
6 c1sus2- ssh into fb1. At the login directory, run the following command with the above port name (replace the "#" with it). If you have multiple hosts, run the command one by one.
./dolphin_ix_port_control.sh --disable 192.168.113.40 #
- ssh into the problematic machine. Use the following command to reboot it. Now this does not crash other machines!
sudo reboot
- Once the machine starts rebooting, run the dolphin enabling command on fb1.
./dolphin_ix_port_control.sh --enable 192.168.113.40 #
This should be done before the IOP (c1x07 etc) comes up. Otherwise, that IOP fails. It's allright. If the IOP (and other processes fails), just stop them with
rtcds stop --all
and enable dolphin with the above command. And then run
rtcds start --all
- Once everything is up, burtrestore appropriate snapshots.