Differences between revisions 5 and 8 (spanning 3 versions)

Plan for January

GOAL of this month

to stabilize the arm displacement using the green beat note

Action Items

Indicators
attachment:green.png complete	attachment:orange.png intermediate state	attachment:red.png nothing happened	attachment:black.png gave up

BR BR

Step 1. X arm alignment for IR
action	description	status	notes
setup DC_PD at an available port	to find a fringe	attachment:green.png	put Thorlabs PDA255 at AS
align BS, ITMX and ETMX		attachment:green.png
place TRANS_MON_PD		attachment:red.png
hook it up TRANS_MON to ADC	`c1iscex`	attachment:red.png
make a simple mod/demod system	to lock the IR without `c1lsc`	attachment:red.png
feeding back the signal to MCL	to lock the IR	attachment:red.png
A2L for IR	for precise alignment	attachment:red.png

Step 2. Re-alignment of green
action	description	status	notes
change beam axis		attachment:red.png	attachment:help.png need a helper
rearrange the optical setup at X end	if necessary	attachment:red.png
lock the green to X arm		attachment:red.png
overlap the axis to the IR	using A2L	attachment:red.png

Step 3. Beat note detection
action	description	status	notes
finalize the setup at PSL table	Electronics, cables and etc.,..	attachment:red.png
alignment of optics at PSL table		attachment:red.png
temperature tuning of the lasers		attachment:red.png	need a helper

Step 4. Digital control to stabilize X arm
action	description	status	notes
connect VCO signal to ADC	hook up it to `c1ioo`	attachment:red.png	need a helper
simulink model refinement		attachment:red.png
DAQ setting		attachment:red.png
feedback to ETMX		attachment:red.png
medm screen		attachment:red.png

Advanced_Techniques/Green_Locking/January_2011 (last edited 2012-01-03 23:02:44 by localhost)

-  ⇤ ← Revision 5 as of 2011-01-06 20:25:14 → 
  Size: 1846
  Editor: KiwamuIzumi
  Comment:
+   ← Revision 8 as of 2011-01-06 20:44:26 → ⇥
  Size: 2621
  Editor: KiwamuIzumi
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 14:
+[[BR]]
-Line 15:
+Line 16:
-||''''' action ''''' ||''''' description ''''' || ''''' status ''''' || ''''' notes '''''||
|| setup DC_PD at an available port || ||<:>attachment:green.png || put Thorlabs PDA255 at AS  ||
+||<:>''''' action ''''' ||<:>''''' description ''''' ||<:> ''''' status ''''' ||<:> ''''' notes '''''||
|| setup DC_PD at an available port || to find a fringe ||<:>attachment:green.png || put Thorlabs PDA255 at AS  ||
-Line 19:
+Line 20:
-|| make a simple mod/demod system || to lock the IR ||<:>attachment:red.png || ||
+|| hook it up TRANS_MON to ADC|| {{{ c1iscex }}}||<:>attachment:red.png || ||
|| make a simple mod/demod system || to lock the IR without {{{c1lsc }}}||<:>attachment:red.png || ||
-Line 22:
+Line 24:
-[[BR]]
+||||||||||
 Line 26:
-||''''' action ''''' ||''''' description ''''' ||''''' status ''''' || ''''' notes '''''||
|| change beam axis || ||<:>attachment:red.png || put PDA255 at AS  ||

[[BR]]
+||<:>''''' action ''''' ||<:>''''' description ''''' ||<:>''''' status ''''' ||<:> ''''' notes '''''||
|| change beam axis || ||<:>attachment:red.png || attachment:help.png need a helper  ||
|| rearrange the optical setup at X end || if necessary ||<:>attachment:red.png || ||
|| lock the green to X arm || ||<:>attachment:red.png || ||
|| overlap the axis to the IR || using A2L ||<:>attachment:red.png || ||
||||||||||
-Line 31:
+Line 33:
-||''''' action ''''' ||''''' description ''''' ||''''' status ''''' || ''''' notes '''''||
|| change beam axis || ||<:>attachment:red.png || put PDA255 at AS  ||


[[BR]]
||||||<tablestyle="width: 80%">'''''Step 4. Digital control to stabilize X arm '''''||
||''''' action ''''' || ''''' status ''''' || ''''' notes '''''||
|| set up DC_PD at an available port ||<:>attachment:green.png || put PDA255 at AS  ||
|| align BS, ITMX and ETMX ||<:>attachment:green.png  ||  ||
|| || ||
+||<:>''''' action ''''' ||<:>''''' description ''''' ||<:>''''' status ''''' ||<:> ''''' notes '''''||
|| finalize the setup at PSL table || Electronics, cables and etc.,.. ||<:>attachment:red.png ||  ||
|| alignment of optics at PSL table || ||<:>attachment:red.png || ||
|| temperature tuning of the lasers || ||<:>attachment:red.png || need a helper ||
||||||||||
||||||||<tablestyle="width: 80%">'''''Step 4. Digital control to stabilize X arm '''''||
||<:>''''' action ''''' ||<:>''''' description ''''' ||<:>''''' status ''''' ||<:>''''' notes '''''||
||connect VCO signal to ADC || hook up it to {{{ c1ioo }}} ||<:>attachment:red.png|| need a helper ||
||simulink model refinement || ||<:>attachment:red.png|| ||
||DAQ setting || ||<:>attachment:red.png || ||
|| feedback to ETMX || ||<:>attachment:red.png|| ||
||medm screen || ||<:>attachment:red.png|| ||