|
Size: 2042
Comment:
|
Size: 2702
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| ## page was renamed from Upgrade 08/Overview == Arm Cavity Finesse == We will change the transmission of the ITMs from 0.5% to 1.4% to match the new AdvLIGO design. |
<<TableOfContents([2])>> ------- = Purpose of the upgrade = ------- == To demonstrate AdvLIGO interferometer technologies == === ►Prototyping of AdvLIGO LSC === * '''Lock acquisition''' * "Prove AdvLIGO LSC actually works" * [=> Link to 40m lock acq][=> Link to AdvLIGO LSC scheme] * '''Green laser locking''' [=> Link to 40m ALS][=> Link to AdvLIGO ALS] * "Realize lock of the arms independently from the main beam" * "Achieve semi-deterministic lock & smooth handing off" * '''Noise mechanisms / DC readout''' * "Discover and/or confirm by a model RSE specific noise couplings" |
| Line 5: | Line 16: |
| We will also replace the MOS (with 1.25 kg masses) with SOSs. This is to increase the effect of radiation pressure. | === ►Tuned / Detuned RSE comparison === * "Clarify advantage and disadv. of the tuned/detuned configuration" * "Demonstrate smooth transition" |
| Line 7: | Line 20: |
| We will not fine-tune the coatings of the ITMs for cool dichroic properties unless some coating place gives us a <4 month lead time. | === ►RGC based digital control system === * "Demonstrate complicated LSC code on the connected multiple systems" * "Establish rapid prototyping methods with simulated plants on the processors" * [=> Link to 40m CDS][=> Link to AdvLIGO CDS] |
| Line 9: | Line 25: |
| == Modulation Frequencies == We will change the modulation frequencies from f1=33 MHz and f2 = 166 MHz to f1 = 9 MHz and f2 = 45 MHz. We will increase the length of the MC to accomodate this. |
------- == To do anything useful to make the AdvLIGO easier / faster == === ►DC&Dither technologies === * Offset lock and handoffs * AF WFS technique * "Develop and characterize various new useful techniques" |
| Line 12: | Line 32: |
| == Recycling Cavities == We will increase the length of the RCs to handle the lower modulation frequency. This will require 2 tip/tilt mirrors per cavity. These will be imperial, eddy current damped versions of the ANU tip/tilt mirrors. |
=== ►Interferometer Diagnosis === * Cavity characterization using aux. laser injection * "Provide a method of precise in-situ characterization of the interferometer" |
| Line 15: | Line 36: |
| Should we get new PR and SR or use what we have? (curvature, reflectivity). Maybe we should match the AdvLIGO Gouy phases. | === ►Development / test bench of advanced technologies === * GigE CCD WFS technique * Adaptive noise cancellation [=> Link to 40m ASS] * "Demonstrate how it works" * "Understand and improve its limitations" |
| Line 17: | Line 42: |
| We will make the tip/tilts so that we can have a POP signal. We also keep POX & POY. | ------- = Major things to be upgraded = ------- === ►Interferometer design === * AdvLIGO like optical configuration / sensing scheme * Arm finesse of about 450 * 2 Phase modulations (11MHz & 55MHz), no Mach Zehndar * Longer PRC/SRC => Use of Folding mirror * PR gain decided for carrier, SR gain decided by sensitivity * Small asymmetry, extraction of f2 by a undercoupled SEC => good through put of f2 to the dark port * Use of third harmonic demodulation scheme * Links to [Optical Configuration][Power Budget][Optical Layout][PRC/SRC design][Sensing scheme][Lock Acquisition scheme] |
| Line 19: | Line 55: |
| == Mach Zender == We will not use a Mach Zender. We will use 2-3 EOMs in series or a UF Trimod if it shows up. |
* Tuned or detuned? * Tuned / offset detuning What should be compared? |
| Line 22: | Line 58: |
| == Control System Computers == We will have a big multi-core box to run all of the front ends. It will have fast fiber links to remote ADC/DACs. |
=== ►Green laser locking == * Arm length stabilization using auxiliary 532nm lasers at the end of each arm. * Dichroic coating for 532nm and 1064nm |
| Line 25: | Line 62: |
| == Multi-wavelength Locking == Make wedges and coatings to accomodate multi-color locking if the lead time is reasonable. The beam from the end should not see the corner. |
== ►CDS (Control and Data System) == * AdvLIGO style digital control system with code generation using Matlab/Simulink (Realtime Code Generator) * Realtime code development with "virtual interferometer" * Links to [CDS upgrade] |
| Line 28: | Line 67: |
| == Optical Levers == Make a fiber based OL delivery scheme. Try to also make 40m long OLs by putting turning mirrors into the vacuum system. |
== ►Mechanics == |
| Line 31: | Line 69: |
| == Analog Electronics == === Suspensions === No change of the suspension analog electronics. We will have interface cards/connectors to go from new style ADC/DACs into the old analog electronics. === LSC === New RFPDs for the 9 & 45 MHz as well as 3*f1 (27 MHz). Maybe DD as well. == Cameras == We'll have GigE cameras and an all GigE backbone for all CDS connections. |
== ►Electronics == |
<<TableOfContents: execution failed [Argument "maxdepth" must be an integer value, not "[2]"] (see also the log)>>
Purpose of the upgrade
To demonstrate AdvLIGO interferometer technologies
►Prototyping of AdvLIGO LSC
Lock acquisition
- "Prove AdvLIGO LSC actually works"
[=> Link to 40m lock acq][=> Link to AdvLIGO LSC scheme]
Green laser locking [=> Link to 40m ALS][=> Link to AdvLIGO ALS]
- "Realize lock of the arms independently from the main beam"
"Achieve semi-deterministic lock & smooth handing off"
Noise mechanisms / DC readout
- "Discover and/or confirm by a model RSE specific noise couplings"
►Tuned / Detuned RSE comparison
- "Clarify advantage and disadv. of the tuned/detuned configuration"
- "Demonstrate smooth transition"
►RGC based digital control system
- "Demonstrate complicated LSC code on the connected multiple systems"
- "Establish rapid prototyping methods with simulated plants on the processors"
[=> Link to 40m CDS][=> Link to AdvLIGO CDS]
To do anything useful to make the AdvLIGO easier / faster
►DC&Dither technologies
- Offset lock and handoffs
- AF WFS technique
- "Develop and characterize various new useful techniques"
►Interferometer Diagnosis
- Cavity characterization using aux. laser injection
- "Provide a method of precise in-situ characterization of the interferometer"
►Development / test bench of advanced technologies
- GigE CCD WFS technique
Adaptive noise cancellation [=> Link to 40m ASS]
- "Demonstrate how it works"
- "Understand and improve its limitations"
Major things to be upgraded
►Interferometer design
- AdvLIGO like optical configuration / sensing scheme
- Arm finesse of about 450
2 Phase modulations (11MHz & 55MHz), no Mach Zehndar
Longer PRC/SRC => Use of Folding mirror
- PR gain decided for carrier, SR gain decided by sensitivity
Small asymmetry, extraction of f2 by a undercoupled SEC => good through put of f2 to the dark port
- Use of third harmonic demodulation scheme
- Links to [Optical Configuration][Power Budget][Optical Layout][PRC/SRC design][Sensing scheme][Lock Acquisition scheme]
- Tuned or detuned?
- Tuned / offset detuning What should be compared?
=== ►Green laser locking ==
- Arm length stabilization using auxiliary 532nm lasers at the end of each arm.
- Dichroic coating for 532nm and 1064nm
►CDS (Control and Data System)
- AdvLIGO style digital control system with code generation using Matlab/Simulink (Realtime Code Generator)
- Realtime code development with "virtual interferometer"
- Links to [CDS upgrade]
►Mechanics