== Computers ==
||Computer ||Number ||Location ||
||Megatron (16 core machine) ||1 ||1Y9 (Y end) ||
||4 core machines (1U chassis) - LSC and SUS (SUS still needs a board from "onestop" to talk to IO chassis) (LSC already has a dolphin board to connect via fiber to its remote IO chassis) ||2 ||1Y4 ||
||4 core machine (1 U chassis) - End X machine(with ||1 ||1X4 ||
||OMC  (dual core) ||1 ||Under beam tube next to 1x1 ||
||ASS (quad core machine) ||1 ||Bottom of 1Y3 ||


== Chassis, Boards, and Interfaces ==
||Chassis/Board ||Number ||Location ||
||'''SUS IO Chassis (large style)''' ||1 ||1Y4 ||
||.   Timing Board, DCC #: D070071 ||1 ||SUS IO Chassis ||
||.   Trenton BPX6806 506806, 18 slot PCIe backplane ||1 ||SUS IO Chassis ||
||'''End X IO Chassis (small style)''' ||1 ||1X4 ||
||.   Advanced LIGO IO Chassis Interface DCC #:D0902029-v2   ||<^>1||<^>End X IO Chassis||
||.   Contec DIO-1616L-PE Isolated Digital IO board ||1 ||End X IO Chassis, Trenton BPX slot ?? ||
||.   Trenton BPX5 506510, 4 slot PCIe backplane ||1 ||End X IO Chassis ||
||.   Timing Board, DCC #: D070071 ||1 ||End X IO Chassis ||
||.   PMC66-16AO16-16-F0-OF (DAC) || 1 || End X IO Chassis ||
||.   PMC66-16AI6455A-64-50M  (ADC) || 1 || End X IO Chassis ||
||.   AdL General Standards 16 bit ADC adapter board D0902006 || 1 || End X IO Chassis ||
||.   AdL General Standards 16 bit DAC adapter board D0902496-v1 || 1 || End X IO Chassis ||
||'''Old Megatron IO Chassis (old style - should not be used)''' ||1 || Behind 1Y5 ||
||.   PCIx DAC Adapter D060061 ||1 ||In IO chassis behind 1Y5||
||.   PCIx Timing Interface D060064 ||1 ||In IO chassis behind 1Y5 ||
||.   PCIx ADC Adapter D060060 ||1 ||In IO chassis behind 1Y5 ||
||.   PMC66-16AO16-16-F0-OF (DAC) ||1 ||In IO chassis behind 1Y5 ||
||.   PMC66-16AI6455A-64-50M  (ADC) ||1 ||In IO chassis behind 1Y5 ||
||.   Contec DIO-1616L-PE Isolated Digital IO board ||1 ||In IO chassis behind 1Y5 ||
||.   Host Adapter board of some sort (for talking to computer || 1 || In IO chassis behind 1Y5 ||
||Anti-Alias Interface D080281 Rev A1 ||1 ||1Y3 ||
||ADC_DAC In-line Tester D060124 Rev 00 ||3 ||1Y3 ||
||PMC66-16AI64SSA-64-50M + PCIe-PMC adapter ||2 ||1Y3 ||
||Dolphin 10-port Switch ||1 ||1Y3 ||
||ADC to DB44/37 Adapter ||2 ||1Y9 and behind 1Y5 ||
||Binary IO Adapter D080478 ||8 ||1Y9 and behind 1Y5 ||
||DAC Adapter ||5 ||1Y9 and behind 1Y5 ||
||VMIC VMIPC 5565 RFM Card ||1 ||Inside Megatron 1Y9 ||
||Contec DO-32L-PE Isolated Digital Output Board ||9 ||Behind 1Y6 area ||
||OSS-PCIe-HIB2-x4-H (Host Interface board that goes into computers) || 2 || Behind 1Y6 area ||
||PMC66-16AO16-16-F0-OF (DAC) || 8 || Behind 1Y5 area and on Joe's Desk in Office Area ||
||PMC66-16AI6455A-64-50M  (ADC) || 8 || Behind 1Y5 area and on Joe's Desk in Office Area ||
||ADL General Standards 16-Bit DAC Adaptor Board DCC: D0902496-v1 || 7 || Joe's Desk in Office Area ||
||ADL General Standards 16-BIT ADC Adaptor Board DCC: D0902006 || 7 || Joe's Desk in Office Area ||
 


== Cables ==
||Cables ||Number ||Location ||
||~2' Molex cables (used for Dolphin switch) ||2 ||1Y3 ||
||~6' Molex cable (used for Dolphin switch) ||1 ||1Y3 ||
||~2' Molex cable (used between IO expansion/Megatron) ||1 ||Connected to Megatron 1Y9 ||
||Short ~3' Single RFM style fiber ||1 ||1Y3 ||
||~10' Double RFM style fiber ||1 ||1Y3 ||
||Large coil Molex cable (used for Dolphin switch to computer) ||1 ||1Y3 ||
||50 pin square connector ribbon cable ||1 ||1Y3 ||
||68 pin D-sub ribbon cable with 10 connectors ||1 ||1Y3 ||
||68 pin D-sub ribbon cable ||1 ||1Y3 ||
||68 pin D-sub round cable ||1 ||1Y3 ||
||37 pin D-sub ribbon cables ||2 ||1Y9 ||
||40 pin square ribbon cable ||1 ||1Y9 ||
||68 pin D-sub round cable ||1 ||1Y9 ||
||100' Fiber cable (for timing) || 2 || Joe's Desk in Office Area ||


== Other Hardware ==
||Hardware ||Number ||Location ||
||L Mounting Bracket ||2 ||1Y3 ||
|| || || ||

== Stuff we still need ==