Differences between revisions 7 and 26 (spanning 19 versions)
⇤ ← Revision 7 as of 2010-04-16 22:07:53 →
Size: 1293
Editor: JoeBetzwieser
Comment:
← Revision 26 as of 2012-01-03 23:02:43 → ⇥
Size: 4001
Editor: localhost
Comment: converted to 1.6 markup
Deletions are marked like this. Additions are marked like this.
Line 4: Line 4:
||4 core machinces (1U chassis)Need to be setup ||2 ||Behind 1Y6 area || ||4 core machines (1U chassis) - LSC and SUS (SUS still needs a board from "onestop" to talk to IO chassis) (LSC already has a dolphin board to connect via fiber to its remote IO chassis) ||2 ||1Y4 ||
||4 core machine (1 U chassis) - End X machine(with ||1 ||1X4 ||
Line 9: Line 10:
== Boards and Interfaces ==
||Board ||<style="vertical-align: top;">Number ||Location ||
||Anti-Alias Interface D080281 Rev A1 ||<style="vertical-align: top;">1 ||1Y3 ||
||ADC_DAC In-line Tester D060124 Rev 00 ||<style="vertical-align: top;">3 ||1Y3 ||
||<^>PMC66-16AI64SSA-64-50M + PCIe-PMC adapter||<^>2||<^>1Y3||
||<^>Dolphin 10-port Switch||<^>1||<^>1Y3||
||<^>DAC to ADC adapter||<^>1||<^>1Y9||
||<^>ADC to DB44/37 Adapter||<^>1||<^>1Y9||
||<^>Binary IO Adapter D080478||<^>1||<^>1Y9||
||<^>AdLIGO IO Expansion Chassis||<^>1||<^>1Y9||
||<^>PCIx DAC Adapter D060061||<^>1||<^>Inside IO Expansion Chassis 1Y9||
||<^>PCIx Timing Interface D060064||<^>1||<^>Inside IO Expansion Chassis 1Y9||
||<^>PCIx ADC Adapter D060060||<^>1||<^>Inside IO Expansion Chassis 1Y9||
||<^>???||<^>1||<^>Inside IO Expansion Chassis 1Y9||
||<^>???||<^>1||<^>Inside IO Expansion Chassis 1Y9||
||<^>???||<^>1||<^>Inside IO Expansion Chassis 1Y9||
||<^>VMIC VMIPC 5565 RFM Card||<^>1||<^>Inside Megatron 1Y9||		 == Chassis, Boards, and Interfaces ==
||Chassis/Board ||Number ||Location ||
||'''SUS IO Chassis (large style)''' ||1 ||1Y4 ||
||. Timing Board, DCC #: D070071 ||1 ||SUS IO Chassis ||
||. Trenton BPX6806 506806, 18 slot PCIe backplane ||1 ||SUS IO Chassis ||
||'''End X IO Chassis (small style)''' ||1 ||1X4 ||
||. Advanced LIGO IO Chassis Interface DCC #:D0902029-v2 ||<^>1||<^>End X IO Chassis||
||. Contec DIO-1616L-PE Isolated Digital IO board ||1 ||End X IO Chassis, Trenton BPX slot ?? ||
||. Trenton BPX5 506510, 4 slot PCIe backplane ||1 ||End X IO Chassis ||
||. Timing Board, DCC #: D070071 ||1 ||End X IO Chassis ||
||. PMC66-16AO16-16-F0-OF (DAC) || 1 || End X IO Chassis ||
||. PMC66-16AI6455A-64-50M (ADC) || 1 || End X IO Chassis ||
||. AdL General Standards 16 bit ADC adapter board D0902006 || 1 || End X IO Chassis ||
||. AdL General Standards 16 bit DAC adapter board D0902496-v1 || 1 || End X IO Chassis ||
||'''Old Megatron IO Chassis (old style - should not be used)''' ||1 || Behind 1Y5 ||
||. PCIx DAC Adapter D060061 ||1 ||In IO chassis behind 1Y5||
||. PCIx Timing Interface D060064 ||1 ||In IO chassis behind 1Y5 ||
||. PCIx ADC Adapter D060060 ||1 ||In IO chassis behind 1Y5 ||
||. PMC66-16AO16-16-F0-OF (DAC) ||1 ||In IO chassis behind 1Y5 ||
||. PMC66-16AI6455A-64-50M (ADC) ||1 ||In IO chassis behind 1Y5 ||
||. Contec DIO-1616L-PE Isolated Digital IO board ||1 ||In IO chassis behind 1Y5 ||
||. Host Adapter board of some sort (for talking to computer || 1 || In IO chassis behind 1Y5 ||
||Anti-Alias Interface D080281 Rev A1 ||1 ||1Y3 ||
||ADC_DAC In-line Tester D060124 Rev 00 ||3 ||1Y3 ||
||PMC66-16AI64SSA-64-50M + PCIe-PMC adapter ||2 ||1Y3 ||
||Dolphin 10-port Switch ||1 ||1Y3 ||
||ADC to DB44/37 Adapter ||2 ||1Y9 and behind 1Y5 ||
||Binary IO Adapter D080478 ||8 ||1Y9 and behind 1Y5 ||
||DAC Adapter ||5 ||1Y9 and behind 1Y5 ||
||VMIC VMIPC 5565 RFM Card ||1 ||Inside Megatron 1Y9 ||
||Contec DO-32L-PE Isolated Digital Output Board ||9 ||Behind 1Y6 area ||
||OSS-PCIe-HIB2-x4-H (Host Interface board that goes into computers) || 2 || Behind 1Y6 area ||
||PMC66-16AO16-16-F0-OF (DAC) || 8 || Behind 1Y5 area and on Joe's Desk in Office Area ||
||PMC66-16AI6455A-64-50M (ADC) || 8 || Behind 1Y5 area and on Joe's Desk in Office Area ||
||ADL General Standards 16-Bit DAC Adaptor Board DCC: D0902496-v1 || 7 || Joe's Desk in Office Area ||
||ADL General Standards 16-BIT ADC Adaptor Board DCC: D0902006 || 7 || Joe's Desk in Office Area ||
 


== Cables ==
||Cables ||Number ||Location ||
||~2' Molex cables (used for Dolphin switch) ||2 ||1Y3 ||
||~6' Molex cable (used for Dolphin switch) ||1 ||1Y3 ||
||~2' Molex cable (used between IO expansion/Megatron) ||1 ||Connected to Megatron 1Y9 ||
||Short ~3' Single RFM style fiber ||1 ||1Y3 ||
||~10' Double RFM style fiber ||1 ||1Y3 ||
||Large coil Molex cable (used for Dolphin switch to computer) ||1 ||1Y3 ||
||50 pin square connector ribbon cable ||1 ||1Y3 ||
||68 pin D-sub ribbon cable with 10 connectors ||1 ||1Y3 ||
||68 pin D-sub ribbon cable ||1 ||1Y3 ||
||68 pin D-sub round cable ||1 ||1Y3 ||
||37 pin D-sub ribbon cables ||2 ||1Y9 ||
||40 pin square ribbon cable ||1 ||1Y9 ||
||68 pin D-sub round cable ||1 ||1Y9 ||
||100' Fiber cable (for timing) || 2 || Joe's Desk in Office Area ||


== Other Hardware ==
||Hardware ||Number ||Location ||
||L Mounting Bracket ||2 ||1Y3 ||
|| || || ||

== Stuff we still need ==

Computers

Computer

Number

Location

Megatron (16 core machine)

1

1Y9 (Y end)

4 core machines (1U chassis) - LSC and SUS (SUS still needs a board from "onestop" to talk to IO chassis) (LSC already has a dolphin board to connect via fiber to its remote IO chassis)

2

1Y4

4 core machine (1 U chassis) - End X machine(with

1

1X4

OMC (dual core)

1

Under beam tube next to 1x1

ASS (quad core machine)

1

Bottom of 1Y3

Chassis, Boards, and Interfaces

Chassis/Board

Number

Location

SUS IO Chassis (large style)

1

1Y4

. Timing Board, DCC #: D070071

1

SUS IO Chassis

. Trenton BPX6806 506806, 18 slot PCIe backplane

1

SUS IO Chassis

End X IO Chassis (small style)

1

1X4

. Advanced LIGO IO Chassis Interface DCC #:D0902029-v2

1

End X IO Chassis

. Contec DIO-1616L-PE Isolated Digital IO board

1

End X IO Chassis, Trenton BPX slot ??

. Trenton BPX5 506510, 4 slot PCIe backplane

1

End X IO Chassis

. Timing Board, DCC #: D070071

1

End X IO Chassis

. PMC66-16AO16-16-F0-OF (DAC)

1

End X IO Chassis

. PMC66-16AI6455A-64-50M (ADC)

1

End X IO Chassis

. AdL General Standards 16 bit ADC adapter board D0902006

1

End X IO Chassis

. AdL General Standards 16 bit DAC adapter board D0902496-v1

1

End X IO Chassis

Old Megatron IO Chassis (old style - should not be used)

1

Behind 1Y5

. PCIx DAC Adapter D060061

1

In IO chassis behind 1Y5

. PCIx Timing Interface D060064

1

In IO chassis behind 1Y5

. PCIx ADC Adapter D060060

1

In IO chassis behind 1Y5

. PMC66-16AO16-16-F0-OF (DAC)

1

In IO chassis behind 1Y5

. PMC66-16AI6455A-64-50M (ADC)

1

In IO chassis behind 1Y5

. Contec DIO-1616L-PE Isolated Digital IO board

1

In IO chassis behind 1Y5

. Host Adapter board of some sort (for talking to computer

1

In IO chassis behind 1Y5

Anti-Alias Interface D080281 Rev A1

1

1Y3

ADC_DAC In-line Tester D060124 Rev 00

3

1Y3

PMC66-16AI64SSA-64-50M + PCIe-PMC adapter

2

1Y3

Dolphin 10-port Switch

1

1Y3

ADC to DB44/37 Adapter

2

1Y9 and behind 1Y5

Binary IO Adapter D080478

8

1Y9 and behind 1Y5

DAC Adapter

5

1Y9 and behind 1Y5

VMIC VMIPC 5565 RFM Card

1

Inside Megatron 1Y9

Contec DO-32L-PE Isolated Digital Output Board

9

Behind 1Y6 area

OSS-PCIe-HIB2-x4-H (Host Interface board that goes into computers)

2

Behind 1Y6 area

PMC66-16AO16-16-F0-OF (DAC)

8

Behind 1Y5 area and on Joe's Desk in Office Area

PMC66-16AI6455A-64-50M (ADC)

8

Behind 1Y5 area and on Joe's Desk in Office Area

ADL General Standards 16-Bit DAC Adaptor Board DCC: D0902496-v1

7

Joe's Desk in Office Area

ADL General Standards 16-BIT ADC Adaptor Board DCC: D0902006

7

Joe's Desk in Office Area

Cables

Cables

Number

Location

~2' Molex cables (used for Dolphin switch)

2

1Y3

~6' Molex cable (used for Dolphin switch)

1

1Y3

~2' Molex cable (used between IO expansion/Megatron)

1

Connected to Megatron 1Y9

Short ~3' Single RFM style fiber

1

1Y3

~10' Double RFM style fiber

1

1Y3

Large coil Molex cable (used for Dolphin switch to computer)

1

1Y3

50 pin square connector ribbon cable

1

1Y3

68 pin D-sub ribbon cable with 10 connectors

1

1Y3

68 pin D-sub ribbon cable

1

1Y3

68 pin D-sub round cable

1

1Y3

37 pin D-sub ribbon cables

2

1Y9

40 pin square ribbon cable

1

1Y9

68 pin D-sub round cable

1

1Y9

100' Fiber cable (for timing)

2

Joe's Desk in Office Area

Other Hardware

Hardware

Number

Location

L Mounting Bracket

2

1Y3

Stuff we still need

Upgrade_09/CDS/current_hardware (last edited 2012-01-03 23:02:43 by localhost)