<> == Entrance == Guests and visitors are expected to be coming in through the main door that gives access to the Machine shop, Control room, and C&B lab. Here, guest will be prepared for entering the lab. * Check there is enough booties or shoe covers for the amount of people who will be touring. (FYI, Sizes will be either Small or Large) * Check there is enough Laser Safety Glasses for the amount of people who will be touring. (FYI, People who use glasses will most likely wear the [[https://lasersafety.com/product/f22-p5c02-5000//|F22 Shield]]) == Laboratory Preparation == Guests and visitors are expected to be coming into the lab through the Machine Shop. Because of this, we will '''keep the lights ON and have the Suspension illuminated ''' * Illuminate the suspension display with the green and white flashlight. * Turn on all the lights: both arms and both ends and PSL area. * Ensure a clear pathway to the X-End and clear up any stray cables. * Turn on the HeNe laser which illuminate the silica strand display. * Turn on the Chamber illuminators from Sitemap for ALL Chambers. * Change all the Sticky-floor mats inside and outside the lab. == Control Room Preparation == After the Guests and visitors are done with the in-lab tour, they are expected to be come into the control room through NW laboratory Double doors. * Display cool plot from the summary pages that can be easily explained on '''BOTH Televisions''' * Show some real-time live plots that look nice and colorful that can be easily explained. * Display some live specgrams of some interesting channels. * Have chairs available for visitors to sit and remove their shoecovers near the entrance area. * Place an box or basket on the desk of the CAD machine for guests and visitors to place their Laser Safety Glasses. * Want a script to turn on all things for the Tour Mode. === Call JC for Any Questions ===