|
Size: 24
Comment:
|
Size: 1863
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 2: | Line 2: |
== Entrance == Guests and visitors are expected to be coming in through the main door that gives access to the Machine shop, Control room, and C&B lab. Here, guest will be prepared for entering the lab. * Check there is enough booties or shoe covers for the amount of people who will be touring. (FYI, Sizes will be either Small or Large) * Check there is enough Laser Safety Glasses for the amount of people who will be touring. (FYI, People who use glasses will most likely wear the [[https://lasersafety.com/product/f22-p5c02-5000//|F22 Shield]]F22 Shield Style) == Laboratory Preparation == Guests and visitors are expected to be coming into the lab through the Machine Shop. Because of this, we will '''keep the lights off and have the Suspension illuminated ''' * Illuminate the suspension display with the green and white flashlight. * The only lights in the lab which should be left on are is the X-Arm Florescent lights. * Ensure a clear pathway to the X-End and clear up any stray cables. * Turn on the HeNe laser which illuminate the silica strand display. * Turn on the Chamber illuminators from Sitemap for BS and Xend Chambers. == Control Room Preparation == After the Guests and visitors are done with the in-lab tour, they are expected to be come into the control room through NW laboratory Double doors. * Display cool plot from the summary pages that can be easily explained on '''BOTH Televisions''' * Show some real-time live plots that look nice and colorful that can be easily explained. * Ensure a clear pathway to the X-End and clear up any stray cables. * Have chairs available for visitors to sit and remove their shoecovers * Place an box or basket on the desk of the CAD machine for guests and visitors to place their Laser Safety Glasses. |
Entrance
Guests and visitors are expected to be coming in through the main door that gives access to the Machine shop, Control room, and C&B lab. Here, guest will be prepared for entering the lab.
* Check there is enough booties or shoe covers for the amount of people who will be touring. (FYI, Sizes will be either Small or Large)
* Check there is enough Laser Safety Glasses for the amount of people who will be touring. (FYI, People who use glasses will most likely wear the F22 ShieldF22 Shield Style)
Laboratory Preparation
Guests and visitors are expected to be coming into the lab through the Machine Shop. Because of this, we will keep the lights off and have the Suspension illuminated
* Illuminate the suspension display with the green and white flashlight.
* The only lights in the lab which should be left on are is the X-Arm Florescent lights.
* Ensure a clear pathway to the X-End and clear up any stray cables.
* Turn on the HeNe laser which illuminate the silica strand display.
* Turn on the Chamber illuminators from Sitemap for BS and Xend Chambers.
Control Room Preparation
After the Guests and visitors are done with the in-lab tour, they are expected to be come into the control room through NW laboratory Double doors.
* Display cool plot from the summary pages that can be easily explained on BOTH Televisions
* Show some real-time live plots that look nice and colorful that can be easily explained.
* Ensure a clear pathway to the X-End and clear up any stray cables.
* Have chairs available for visitors to sit and remove their shoecovers
* Place an box or basket on the desk of the CAD machine for guests and visitors to place their Laser Safety Glasses.