1 % MCL_Optimization
   2 % 27 August 2007
   3 
   4 % change_gain - changes the damping gain of the
   5 % specified mirror and degree
   6 
   7 % MCL_change_damping - will raster through different pos damping gain values
   8 % for the suspended optics in the cavity specified.  
   9 
  10 % get_MCL_spectrum - gets a calibrated MCL spectrum
  11 
  12 % rms - find the rms value of y(x)
  13 
  14 % MCL_getdata - collects dttfft2 data for the MCL channel for the time from  
  15 % start_time and end_tim
  16 
  17 % tfplot_RMS -  gets the maximum RMS values for the 1hz and
  18 % 3hz peaks in the MCL spectrum at times between start_time and end_time.
  19 
  20 % get_MCL_spectra - gets spectra for MCL with the pos 
  21 % degree set to the same damping gain value for MC1, MC2 and MC3.  
  22 
  23 % MCL_data - MC-L_DATA rasters through the different damping gains in a 
  24 % specified range and collects the MCL spectrum data for the mirrors in
  25 % the cavity specified 
  26 
  27 % Set_damping - sets the damping gain values for all of the degrees of
  28 % freedom of the mode cleaner suspended optics to 0.5.
  29 
  30 % transfer_func - the length calibration for MCL
  31 
  32 % set_ramp_time -  sets the ramp time for pos for the mode cleaner suspended 
  33 % optics to 2 s