Differences between revisions 3 and 7 (spanning 4 versions)

40m work plan

This should be kept up-to-date. This is an overview of our near-term goals. We can link to other TODO lists from here.

PR/DR MI commissioning

PRMI locked!
Investigate triggering (trigger on POP110 instead?)
What is the correct normalization?
Finish updating IFO configure scripts (Jamie)
OSA modulation depth measurements at:
- REFL
- AS
Power budget at all available ports, include 1f(22)/2f(110)
- PRC gain
Oplev calibration (BS? PRM?)
Sensing matrix
Cavity length (use new Anamaria method)
Loop gain (make sure loop is stable for measurements)
Noise budget
Full Finesse model.
Fix hardware anti-aliasing in LSC (move up cutoff freq to correspond to sample rate)

End table upgrade

Project page.

ETMY table must be completed ASAP
- What is left to do?
ETMX upgrade needs to be planned/coordinated.

FPMI

PRFPMI

DRFPMI

Next vent

Will need to vent soon to flip SR2.

SR2 flip
Are all black glass beam dumps installed?

Longer term:

New OSEM mount screws
New periscope plate

-  ⇤ ← Revision 3 as of 2012-01-03 23:02:39 → 
  Size: 130
  Editor: localhost
  Comment: converted to 1.6 markup
+   ← Revision 7 as of 2013-04-03 18:23:37 → ⇥
  Size: 1192
  Editor: JamesonrollinsATligoDOTorg
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-## page was renamed from Other Plans
 * [[Current_Work]] 
 * [[Long_Term_Plans_@_the_40m]] 
 * [[Near_Term_Plans_@_the_40m]]
+= 40m work plan =

This should be kept up-to-date.  This is an overview of our near-term goals.  We can link to other TODO lists from here.

== PR/DR MI commissioning ==

 * PRMI locked!
 * Investigate triggering (trigger on POP110 instead?)
 * What is the correct normalization?

 * Finish updating IFO configure scripts (Jamie)

 * OSA modulation depth measurements at:
   * REFL
   * AS

 * Power budget at all available ports, include 1f(22)/2f(110)
   * PRC gain

 * Oplev calibration (BS? PRM?)

 * Sensing matrix
 * Cavity length (use new Anamaria method)
 * Loop gain (make sure loop is stable for measurements)
 * Noise budget

 * Full Finesse model.

 * Fix hardware anti-aliasing in LSC (move up cutoff freq to correspond to sample rate)

== End table upgrade ==

[[endtable_upgrade|Project page]].
 * ETMY table must be completed ASAP
   * What is left to do?

 * ETMX upgrade needs to be planned/coordinated.

== FPMI ==

== PRFPMI ==

== DRFPMI ==

== Next vent ==

Will need to vent soon to flip SR2.

 * SR2 flip
 * Are all black glass beam dumps installed?

Longer term:

 * New OSEM mount screws
 * New periscope plate