|
Size: 1609
Comment:
|
Size: 1770
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| <<ImageLink(green_electronics_diagram.png,Upgrade 09/GreenLock/Electronics/electronics_diagram green electronics diagram,height=200)>> |
|
| Line 3: | Line 8: |
| Line 19: | Line 27: |
| Line 29: | Line 38: |
| Take PLL signal and pass into a filter bank (with offset and filter). This is the fine control path. | Take PLL signal and pass into a filter bank (with offset and filter). This is the fine control path. |
| Line 37: | Line 45: |
| Voltage Controlled Oscillator control. Need 1 per arm (2). | . Voltage Controlled Oscillator control. Need 1 per arm (2). |
| Line 40: | Line 48: |
| Line 46: | Line 53: |
| Ovens talk to a GPIB interface for temperature readback and set point | Ovens talk to a GPIB interface for temperature readback and set point ---- Questions: 1) Whitening/Dewhiten signals from Green |
Each front end at the ends
Need 2 ADCs and 3 DAC channels per end
Inputs via ADC:
PDH signal (used to modify laser frequency)
Green laser power monitor
Outputs via DAC:
PDH lock gain control output
PDH phase adjustment control
Thermal stabilization of the laser control (is controlled by PDH signal, need a filter bank in between) (need a multiplying constant which is linked to the constant controlling feedback to the coils (inversely))
Via the normal control path: ETM position control (feed into the coil outputs)
Vertex Front End
Need 7 ADCs and 4 DACs at the PSL
Inputs via ADC:
Phased locked loop signal from mixer. Need 1 per arm (2).
RFPD DC mon. Need 1 per arm (2).
Green Power mon. Need only 1.
Frequency discriminator signal. Need 1 per arm (2).
In digital land:
Take PLL signal and pass into a filter bank (with offset and filter). This is the fine control path.
Take frequency discriminator signal, pass into a filter bank. This is coarse control path.
Need a epics channel to be controlled manually or via script to set ratio of sums for coarse and fine control path for ETM (so this feeds into coils for the ETM, going to need RFM channels then)
Outputs via DAC:
- Voltage Controlled Oscillator control. Need 1 per arm (2).
Voltage Controlled Oscillator offset control (needs a input from epics initially) Need 1 per arm (2).
Somewhat related, but not a front end issue:
3 Ovens, 1 each end, 1 at PSL
Ovens talk to a GPIB interface for temperature readback and set point
Questions:
1) Whitening/Dewhiten signals from Green