|
Size: 2927
Comment:
|
Size: 1929
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 25: | Line 25: |
| The wireless network is part of the Martian Network. The Martian ethernet is bridged to wireless via a Linksys Wireless-G access point with IP address 131.215.113.220. Note that the wireless access point is only bridging the wired and wireless networks--it does not do NAT. To access the outside world, your network settings should be the same as given above for the Martian network. The configuration password for the wireless AP is written in a manilla folder in the usual place where equipment manuals are kept. |
The wireless network is part of the Martian Network. The Martian ethernet is bridged to wireless via a Linksys WRT600N wireless router with IP address 131.215.113.220. Note that the wireless access point is only bridging the wired and wireless networks--it does not do NAT. To access the outside world, your network settings should be the same as given above for the Martian network. [[BR]] You can configure the router by accessing its IP address with a web browser. The password for configuring the wireless AP is {{{ll_admin}}}. |
| Line 28: | Line 29: |
| == How to setup linux1 with a name server == | The manual for the router is here: attachment:WRT600N_Manual.pdf |
| Line 30: | Line 31: |
| 1) Linux1 needs network interface statically configured. Example on Debian: edit /etc/network/interfaces, make an entry like {{{ # Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller DEVICE=eth0 BROADCAST=131.215.113.255 HWADDR=00:07:e9:b8:ea:9c IPADDR=131.215.113.20 NETMASK=255.255.255.0 NETWORK=131.215.113.0 ONBOOT=yes GATEWAY=131.215.113.2 TYPE=Ethernet }}} |
Here are several screen shots of the configuration screens: attachment:screen1.pdf attachment:screen2.pdf attachment:screen3.pdf attachment:screen4.pdf |
| Line 43: | Line 33: |
| (but figure out how on a CentOS box, it'll be different). | Basically, you don't care about internet setup because you don't connect anything to the WAN port. The physical connection to the router is just one martian LAN cable to one of the LAN ports.[[BR]] Security is enforced by MAC address filtering. Only registered machines can connect to the wireless network. |
| Line 45: | Line 36: |
| 2) Setup the name system-config-bind (needs to be done locally with GUI). Notes: | |
| Line 47: | Line 37: |
| - periods are important - the forward look up (name to IP address) can list multiple names for the same IP address. use this to give IP addresses to "services" not just specific computers. For example, "ns.martian" is the name server, and can have the same IP address as "linux1.martian". - in named.conf.options be sure to enable all the interfaces that are needed, including the loop-back device (127.0.0.1) |
|
| Line 51: | Line 38: |
| 3) Add 127.0.0.1 to /etc/resolv.conf before all the other name servers, as in nameserver 127.0.0.1 At this point you should be able to do host name look-ups: "host linux1.martian" If not, fix before continuing 4) replace dhcpv6_client with dhclient and add dhcp (the server package). 5) edit config file (/etc/dhcp3/dhcpd.conf on a Debian system). 6) turn off all other dhcp servers on network (linksys thing), and try rebooting something and see if it picks up an IP address and gets told the correct gateway and name server blah blah blah. 7) when you edit a config file, you'll need to restart the service. for example, with /etc/init.d/bind restart |
== 40m Martian Computer List (.odp format) == attachment:40m%20Martian%20Network%20Computer%20List |
The 40m has two network segments: the LIGO general computing network and an internal "martian" network.
LIGO Caltech network
IP addresses on this network are in the form 131.215.114.XXX
Martian network
IP addresses on the martian network are in the form 131.215.113.XXX
The wireless network is on the martian network.
Gateway |
131.215.113.2 |
netmask |
255.255.255.0 |
nameserver |
131.215.125.1 |
nameserver |
131.215.139.100 |
nameserver |
131.215.254.99 |
See also Martian Host Table for IP address assignments on the martian network.
When you add a new host to the Martian network, choose a name from Computers and Scripts/Pool of Names for Computers.
Wireless Network
The wireless network is part of the Martian Network. The Martian ethernet is bridged to wireless via a Linksys WRT600N wireless router with IP address 131.215.113.220. Note that the wireless access point is only bridging the wired and wireless networks--it does not do NAT. To access the outside world, your network settings should be the same as given above for the Martian network. BR You can configure the router by accessing its IP address with a web browser. The password for configuring the wireless AP is ll_admin.
The manual for the router is here: attachment:WRT600N_Manual.pdf
Here are several screen shots of the configuration screens: attachment:screen1.pdf attachment:screen2.pdf attachment:screen3.pdf attachment:screen4.pdf
Basically, you don't care about internet setup because you don't connect anything to the WAN port. The physical connection to the router is just one martian LAN cable to one of the LAN ports.BR Security is enforced by MAC address filtering. Only registered machines can connect to the wireless network.
40m Martian Computer List (.odp format)
attachment:40m%20Martian%20Network%20Computer%20List