Differences between revisions 25 and 29 (spanning 4 versions)

Mode Cleaner

The Input Mode Cleaner is a suspended triangular cavity. Each mirror of the triangle is 0.25 kg, 3" in diameter and 1" thick. The input mode cleaner length is ~13.5 m (27 m round trip), the Finesse is ~1460. Cavity pole is 3.79kHz.

Beam centering

[http://www.ligo.caltech.edu/docs/T/T020145-00.pdf LIGO-T020145-00-R], "Characterization and commissioning of digital suspensions for the 40m Mode Cleaner"
[http://www.ligo.caltech.edu/docs/T/T020147-00.pdf LIGO-T020147-00-R], "Characterizing the length sensing and control system of the mode cleaner in the LIGO 40m lab"

-  ⇤ ← Revision 25 as of 2010-07-13 00:36:37 → 
  Size: 910
  Editor: KiwamuIzumi
  Comment:
+   ← Revision 29 as of 2011-12-19 22:03:07 → ⇥
  Size: 948
  Editor: KiwamuIzumi
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 3:
- . The Input Mode Cleaner is a suspended triangular cavity. Each mirror of the triangle is 0.25 kg, 3" in diameter and 1" thick.
+ . The Input Mode Cleaner is a suspended triangular cavity. Each mirror of the triangle is 0.25 kg, 3" in diameter and 1" thick. The input mode cleaner length is ~13.5 m (27 m round trip), the Finesse is ~1460.  Cavity pole is 3.79kHz.
 Line 5:
-The input mode cleaner length is ~13.5 m (27 m round trip), the Finesse is ~1460.  Cavity pole is 3.79kHz.
-Line 7:
+Line 6:
-[[Installing the Input Mode Cleaner board]]
-Line 9:
+Line 7:
-attachment:MC-Schematic.pdf
-Line 11:
+Line 8:
-== Beam centering ==
+= Beam centering =
-Line 20:
+Line 17:
-== WFS ==
+= Alignment Sensing and Control =
-Line 22:
+Line 19:
+= Analog circuits =

 . [attachment:MC-Schematic.pdf common mode servo circuit board]