|
Size: 627
Comment:
|
Size: 862
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 6: | Line 6: |
| * Slightly cleaned up version of Kirk's: attachment: powfab.zip | * Slightly cleaned up version of Kirk's: attachment:powfab.zip |
| Line 8: | Line 8: |
| * Added a spob detector to opt40.m. Changed the losses of the optics to be more accurate (from 1ppm). to PR = 60ppm, SR = 60ppm, BS = 100ppm, ITMX = 100ppm, ITMY = 100ppm, ETMX = 100ppm, ETMY = 100ppm. attachment:smoo_PRFPMI.tar.gz |
Optickle for the PRFPMI at the 40m
attachment:Optickle_prfpmi_40m.zip
In the folder 40m_PRFPMI the parameters have been set to mimic the state that the smoo_prfpmi script gets us to. See Rana's ilog entry.
- The initial conditions are such that the arms are on resonance, the MICH is at 0.8 of a bright fringe, the PRC is at resonance for the carrier (power builds up in the PRC).
- Transmission of the signal recycling mirror is set to 1 in the opt40.m parameter file.
- Slightly cleaned up version of Kirk's: attachment:powfab.zip
- (unzip into the directory where you want your powfab Optickle files)
- Added a spob detector to opt40.m. Changed the losses of the optics to be more accurate (from 1ppm). to PR = 60ppm, SR = 60ppm, BS = 100ppm, ITMX = 100ppm, ITMY = 100ppm, ETMX = 100ppm, ETMY = 100ppm. attachment:smoo_PRFPMI.tar.gz