Diff for "IFO_Modeling/Optickle"

Differences between revisions 2 and 8 (spanning 6 versions)

attachment:Optickle_prfpmi_40m.zip

In the folder 40m_PRFPMI the parameters have been set to mimic the state that the smoo_prfpmi script gets us to. See Rana's ilog entry.
The initial conditions are such that the arms are on resonance, the MICH is at 0.8 of a bright fringe, the PRC is at resonance for the carrier (power builds up in the PRC).
Transmission of the signal recycling mirror is set to 1 in the opt40.m parameter file.
Slightly cleaned up version of Kirk's: attachment:powfab.zip
- (unzip into the directory where you want your powfab Optickle files)
Added a spob detector to opt40.m. Changed the losses of the optics to be more accurate (from 1ppm). to PR = 60ppm, SR = 60ppm, BS = 100ppm, ITMX = 100ppm, ITMY = 100ppm, ETMX = 100ppm, ETMY = 100ppm. attachment:smoo_PRFPMI.tar.gz

-  ⇤ ← Revision 2 as of 2007-01-04 00:40:08 → 
  Size: 70
  Editor: KirkMcKenzie
  Comment:
+   ← Revision 8 as of 2007-02-22 00:46:01 → ⇥
  Size: 862
  Editor: KirkMcKenzie
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-=== OPTICKLE ===
+=== Optickle for the PRFPMI at the 40m ===
 Line 3:
- * blah blah.
+ * In the folder 40m_PRFPMI the parameters have been set to mimic the state that the smoo_prfpmi script gets us to. See [[Rana's ilog entry]]. 
 * The initial conditions are such that the arms are on resonance,  the MICH is at 0.8 of a bright fringe, the PRC is at resonance for the carrier (power builds up in the PRC).
 * Transmission of the signal recycling mirror is set to 1 in the opt40.m parameter file.
 * Slightly cleaned up version of Kirk's: attachment:powfab.zip
    (unzip into the directory where you want your powfab Optickle files)
 * Added a spob detector to opt40.m. Changed the losses of the optics to be more accurate (from 1ppm). 
 to  PR = 60ppm, SR = 60ppm, BS = 100ppm, ITMX = 100ppm, ITMY = 100ppm, ETMX = 100ppm, ETMY = 100ppm. attachment:smoo_PRFPMI.tar.gz