Differences between revisions 1 and 2
⇤ ← Revision 1 as of 2021-09-21 18:31:22 →
Size: 585
Editor: AnchalguptaATligoDOTorg
Comment:
← Revision 2 as of 2021-09-21 18:32:00 → ⇥
Size: 679
Editor: AnchalguptaATligoDOTorg
Comment:
Deletions are marked like this. Additions are marked like this.
Line 7: Line 7:

== Build and Install ==
Note, you do not need to stop running rtcds models for this step.

Modify.Build.Install.Start.

Here you get instructions on how to modify a simulink model that runs on the FE machine, build it, install it and start it with the changes.

The simulink models can be found in /cvs/cds/rtcds/userapps/trunk/isc/c1/models. Find the appropriate model file, open it on matlab from one of the workstations in the control room and do the appropriate changes. To add a new DAQ channel, in the topmost simulink block in the #DAQ Channels list box, add the name of the channel you want to add without C1:XXX- part.

Build and Install

Note, you do not need to stop running rtcds models for this step.

How_To/Modify_Build_Install_Start_model (last edited 2025-01-24 20:50:52 by RadhikabhattATligoDOTorg)