Differences between revisions 8 and 9
⇤ ← Revision 8 as of 2009-08-20 05:30:43 →
Size: 1298
Editor: RobertWard
Comment:
← Revision 9 as of 2009-08-20 05:30:55 → ⇥
Size: 1312
Editor: RobertWard
Comment:
Deletions are marked like this. Additions are marked like this.
Line 17: Line 17:
This will measure the plant, giving you info along the way and putting the results into some files. The last line of screen output should give you This will measure the plant, giving you info along the way and putting the results into some files. The last line of screen output should give you something like:

Diagonalize the DRMI Length Control

This should be run while the DRM is locked & aligned

In the $SCRIPTS/LSC directory, run 

setDDphases

This will servo the DD phases to zero, so there will be no offset at the operating point. After that script finishes, run 

senseDRM

This will measure the plant, giving you info along the way and putting the results into some files. The last line of screen output should give you something like: 

Your command to copy and paste into a terminal is:


tdswrite C1:LSC-ITMTRX_92 -1.1198 \
C1:LSC-ITMTRX_b2 2.8519 \
C1:LSC-ITMTRX_d2 -0.17059 \
C1:LSC-ITMTRX_f2 0.28573 \
C1:LSC-ITMTRX_122 -0.089699 \
C1:LSC-ITMTRX_142 -0.065893 \
C1:LSC-ITMTRX_95 0.30456 \
C1:LSC-ITMTRX_b5 -0.69205 \
C1:LSC-ITMTRX_d5 0.046096 \
C1:LSC-ITMTRX_f5 -0.074476 \
C1:LSC-ITMTRX_125 0.022033 \
C1:LSC-ITMTRX_145 0.0052107 \
C1:LSC-ITMTRX_93 -1.3128 \
C1:LSC-ITMTRX_b3 2.6644 \
C1:LSC-ITMTRX_d3 -1.5412 \
C1:LSC-ITMTRX_f3 -0.82075 \
C1:LSC-ITMTRX_123 -0.49044 \
C1:LSC-ITMTRX_143 0.070841 \
C1:LSC-ITMTRX_33 0 \
C1:LSC-ITMTRX_42 0 \
C1:LSC-ITMTRX_155 0

You can copy & paste this command into a terminal to load the new input matrix values.

How_To/Diagonalize_the_DRMI_Length_Control (last edited 2012-01-03 23:02:45 by localhost)