|
Size: 1462
Comment:
|
Size: 1312
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| ## page was renamed from Diagonalize the DRMI Length Control | |
| Line 2: | Line 3: |
==== NB: This does not work completely, as the matrix inversion is not yet done correctly ==== |
|
| Line 7: | Line 6: |
| ===== This should be run while the DRM is locked & aligned, and after the double demod demod phases have been set so that the offsets are zero ===== | ===== This should be run while the DRM is locked & aligned ===== |
| Line 10: | Line 9: |
| {{{ setDDphases }}} This will servo the DD phases to zero, so there will be no offset at the operating point. After that script finishes, run |
|
| Line 14: | Line 17: |
| This will measure the plant, giving you info along the way and putting the results into some files. The last line of screen output should give you a matlab command to run, such as {{{ Use the matlab command: loadDRMImatrixData('DRMImatrix/DAT_090612-1244839443'); }}} Run this matlab command, which will give you a tdswrite command: |
This will measure the plant, giving you info along the way and putting the results into some files. The last line of screen output should give you something like: |
Diagonalize the DRMI Length Control
This should be run while the DRM is locked & aligned
In the $SCRIPTS/LSC directory, run
setDDphases
This will servo the DD phases to zero, so there will be no offset at the operating point. After that script finishes, run
senseDRM
This will measure the plant, giving you info along the way and putting the results into some files. The last line of screen output should give you something like:
Your command to copy and paste into a terminal is: tdswrite C1:LSC-ITMTRX_92 -1.1198 \ C1:LSC-ITMTRX_b2 2.8519 \ C1:LSC-ITMTRX_d2 -0.17059 \ C1:LSC-ITMTRX_f2 0.28573 \ C1:LSC-ITMTRX_122 -0.089699 \ C1:LSC-ITMTRX_142 -0.065893 \ C1:LSC-ITMTRX_95 0.30456 \ C1:LSC-ITMTRX_b5 -0.69205 \ C1:LSC-ITMTRX_d5 0.046096 \ C1:LSC-ITMTRX_f5 -0.074476 \ C1:LSC-ITMTRX_125 0.022033 \ C1:LSC-ITMTRX_145 0.0052107 \ C1:LSC-ITMTRX_93 -1.3128 \ C1:LSC-ITMTRX_b3 2.6644 \ C1:LSC-ITMTRX_d3 -1.5412 \ C1:LSC-ITMTRX_f3 -0.82075 \ C1:LSC-ITMTRX_123 -0.49044 \ C1:LSC-ITMTRX_143 0.070841 \ C1:LSC-ITMTRX_33 0 \ C1:LSC-ITMTRX_42 0 \ C1:LSC-ITMTRX_155 0
You can copy & paste this command into a terminal to load the new input matrix values.