== Overview ==
Our new Video Switch is a [[http://www.extron.com/product/product.aspx?id=mavplus3232v|Extron MAV PLUS 3232]].

{{attachment:mavpic.jpg}}

<<BR>><<BR>>
== how to restore the matrix ==
 1.  access to http://192.168.113.92/ by an web browser
 1.  go to the '' control '' tab in the top of the page
 1.  go to the '' Global Presets '' in the left bar
 1.  click '' 40M Default''

<<BR>><<BR>>
== Setup Howto ==
 1. Connect ethernet cable directly to the videos switcher with a computer.
 1. from the computer, go to default switcher's address 192.168.254.254 by using web browser like firefox.
 1. if you can not see any pages in the browser, try telnet to 192.168.254.254 to check the connection.
 1. change the IP address, the Gateway address and subnet mask properly in the web page.
 1. put the video switcher into the network via another ethernet cable.
 1. you can access the switcher from anywhere in the 40m by using web browser
 1. connect analog video cables
 1. assign output-input matrix by accessing the switcher from an web browser

<<BR>><<BR>>
== Docs ==
[[attachment:manuel.pdf|Manual]]

[[attachment:quickref.pdf]] <<BR>> <<BR>>

== Configuration ==
=== network ===
 * name = '''LUCIANA'''
 * address = http://192.168.113.92/

<<BR>><<BR>>
= MISLEADING and WRONG =
=== Channels Assigned ===
 || '''INPUTS''' || || '''OUTPUTS''' ||
 || ''channel'' || ''camera'' || ''state'' || || ''channel'' || ''Monitor'' || ''state'' ||
 || 1 ||   MC2F || :) || ||1 ||CRT1 (MON 1) || :) ||
 || 2 ||IFOPO ||  no camera || ||2 ||ETMY Monitor || :) ||
 || 3 ||  OMCR ||  :) || ||3 ||CRT2 (MON 2) || :) ||
 || 4 ||   FI ||  :) || ||4 ||CRT4 (MON 4) || :) ||
 || 5 ||    AS Spare || not there || ||5 ||MC1 Monitor || :) ||
 || 6 ||   ITMYF ||  :) || ||6 ||CRT3 (MON 3) || :) ||
 || 7 ||   ITMXF ||  :) || ||7 ||PSL1 Monitor || :) ||
 || 8 ||   ETMYF ||  :) || ||8 ||PSL2 Monitor || no monitor ||
 || 9 ||   ETMXF ||  :) || ||9 ||CRT6 (MON 6) || :) ||
 || 10 ||PMCR ||  :) || ||10 ||CRT5 (MON 5) || :) ||
 || 11 ||   RCR ||  :) || ||11 ||ETMX Monitor || :)  ||
 || 12 ||   RCT ||  :) || ||12 ||MC2 Monitor || no monitor ||
 || 13 ||   PSL Spare ||  no camera || ||13 ||CRT9 || no monitor ||
 || 14 ||   PMCT ||  :) || ||14 ||CRT7 (MON 7) || :) ||
 || 15 ||  ETMXT ||  no camera || ||15 ||CRT10 || no monitor ||
 || 16 ||   MC2T ||  no camera || ||16 || || ||
 || 17 ||    POP ||  no camera || ||17 ||Projector || no monitor ||
 || 18 ||   MCR ||  :) || ||18 || || ||
 || 19 ||   REFL ||  :) || ||19 || || ||
 || 20 ||   MC1F/MC3F ||  :) || ||20 || || ||
 || 21 ||SRMF ||  no camera || ||21 ||Ch1 Quad 1 || ||
 || 22 ||   AS ||  :) || ||22 ||Ch2 Quad 1 || ||
 || 23 ||   ETMYT ||  :) || ||23 ||Ch3 Quad 1 || ||
 || 24 ||   PRM/BS ||  :) || ||24 ||Ch4 Quad 1 || ||
 || 25 ||    OMCT ||  :) || ||25 ||Ch1 Quad 2 || ||
 || 26 || || || ||26 ||Ch2 Quad 2 || ||
 || 27 || || || ||27 ||Ch3 Quad 2 || ||
 || 28 || || || ||28 ||Ch4 Quad 2 || ||
 || 29 ||Quad 1 || || ||29 ||Ch1 Quad 3 || ||
 || 30 ||Quad 2 || || ||30 ||Ch2 Quad 3 || ||
 || 31 ||Quad 3 || || ||31 ||Ch3 Quad 3 || ||
 || 32 || || || ||32 ||Ch4 Quad 3 || ||



=== Note that this table shows the current channel assignment and that X is used for East arm and Y is used for South arm ===
<<BR>><<BR>>

=== ccd/monitor arrangement ===
[[attachment:CCD_OCT3.pdf]] {{attachment:CCD_OCT3.png}}

'''Note that this diagram is for VIDEO system upgrades so Y is used for East arm and X is used for South arm. '''

'''Please use this diagram for just finding the rough position of monitor or cameras because the system is not upgraded yet.'''

'''Upgrade Plan is available at http://nodus.ligo.caltech.edu:8080/40m/4139 '''''' '''

''' '''