Differences between revisions 3 and 19 (spanning 16 versions)
⇤ ← Revision 3 as of 2009-12-29 09:16:55 →
Size: 1028
Editor: RanaAdhikari
Comment:
← Revision 19 as of 2010-11-13 10:01:37 → ⇥
Size: 5390
Editor: KiwamuIzumi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 6: Line 6:
[[BR]][[BR]]
== how to restore the matrix ==
 1. access to http://192.168.113.92/ by an web browser
 1. go to the '' control '' tab in the top of the page
 1. go to the '' Global Presets '' in the left bar
 1. click '' 40M Default''

[[BR]][[BR]]
Line 8: Line 16:
 2. from the computer, go to default switcher's address 192.168.254.254 by using web browser like firefox. 
 3. if you can not see any pages in the browser, try telnet to 192.168.254.254 to check the connection.
 4. change the IP address, the Gateway address and subnet mask properly in the web page. 
 5. put the video switcher into the network via another ethernet cable.
 6. you can access the switcher from anywhere in the 40m by using web browser
 7. connect analog video cables
 8. assign output-input matrix by accessing the switcher from an web browser 		  1. from the computer, go to default switcher's address 192.168.254.254 by using web browser like firefox.
 1. if you can not see any pages in the browser, try telnet to 192.168.254.254 to check the connection.
 1. change the IP address, the Gateway address and subnet mask properly in the web page.
 1. put the video switcher into the network via another ethernet cable.
 1. you can access the switcher from anywhere in the 40m by using web browser
 1. connect analog video cables
 1. assign output-input matrix by accessing the switcher from an web browser
Line 16: Line 24:
[[BR]][[BR]]
Line 19: Line 28:
attachment:quickref.pdf attachment:quickref.pdf [[BR]] [[BR]]
Line 23: Line 32:
 * name = luciana
 * address = 131.215.113.92		  * name = '''LUCIANA'''
 * address = http://192.168.113.92/
Line 26: Line 35:
=== network ===
 . input channels
 . output channels		 [[BR]][[BR]]
=== channel assign ===
 . more information about output channels and monitors are below.
 ||||||||<style="text-align: center;">''' channel assign''' ||
 ||||||<style="text-align: center;"> '''INPUT''' ||
 || ''channel'' || ''camera'' || ''state'' ||
 || 1 || MC2 || :) ||
 || 2 || Faraday || :) ||
 || 3 || PSL output CAM || - ||
 || 4 || BS || :) ||
 || 5 || MC13 || :) ||
 || 6 || ITMX || :) ||
 || 7 || ITMY || :) ||
 || 8 || ETMX || :) ||
 || 9 || ETMY || :) ||
 || 10 || - || - ||
 || 11 || RCR || :) ||
 || 12 || RCT || :) ||
 || 13 || OMCR || - ||
 || 14 || PMCR || :) ||
 || 15 || PSL IOO || - ||
 || 16 || IMCT || not aligned ? ||
 || 17 || PSL || - ||
 || 18 || IMCR || - ||
 || 19 || SPS || :) ||
 || 20 || POB || - ||
 || 21 || POX || no camera ||
 || 22 || APS1 || :) ||
 || 23 || ETMXT || not aligned ||
 || 24 || ETMYT || no camera ||
 || 25 || POY || no camera ||
 || 26 || OMCT || :) ||



[[BR]][[BR]]
=== monitors and output channels ===
 . <<ImageLink(monitos.png, monitors and channels, height=150)>>

=== ccd/monitor arrangement ===
attachment:CCD_OCT3.pdf attachment:CCD_OCT3.png

'''Input Channels'''

||''' Channel number ''' ||''' where its signal is coming ''' ||''' type ''' ||
||''' 1 ''' ||''' C1:IO-VIDEO 1 MC2 ''' ||''' TBD-1 ''' ||
|| 2 || FI CAMERA || 59 ||
|| 3 || PSL OUTPUT CAMERA || 59 ||
||''' 4 ''' ||''' BS C:1O-VIDEO 4 ''' ||''' TBD-1 ''' ||
|| 5 || MC1&3 C:1O-VIDEO 5 || 59 ||
||''' 6 ''' ||''' ITMX C:1O-VIDEO 6 ''' ||''' TBD-1 ''' ||
||''' 7 ''' ||''' C1:IO-VIDEO 7 ITMY ''' ||''' TBD-1 ''' ||
||''' 8 ''' ||''' C1:IO-VIDEO 8 ETMX ''' ||''' TBD-1 ''' ||
||''' 9 ''' ||''' C1:IO-VIDEO 9 ETMY ''' ||''' TBD-1 ''' ||
|| 10 || "No cable is connected (spare channel)" || ||
|| 11 || C1:IO-VIDEO 11 RCR || 59 ||
|| 12 || C1:IO-VIDEO RCT || 59 ||
|| 13 || MCR VIDEO || 59 ||
|| 14 || C1:IO-VIDEO 14 PMCT || 59 ||
|| 15 || VIDEO 15 PSL IOO(OR IOC) || 59 ||
||''' 16 ''' ||''' C1:IO-VIDEO 16 IMCT ''' ||''' TBD-1 ''' ||
||''' 17 ''' ||''' PSL CAMERA ''' ||''' 58 ''' ||
|| 18 || C1:IO-VIDEO 18 IMCR || 59 ||
|| 19 || C1:IO-VIDEO 19 SPS || 59 ||
||''' 20 ''' ||''' C1:IO-VIDEO 20 BSPO ''' ||''' TBD-1 ''' ||
||''' 21 ''' ||''' C1:IO-VIDEO 21 ITMXPO ''' ||''' TBD-1 ''' ||
|| 22 || C1:IO-VIDEO 22 APS1 || 59 ||
||''' 23 ''' ||''' ETMX-T ''' ||''' 58 ''' ||
||''' 24 ''' ||''' ETMY-T ''' ||''' 58 ''' ||
||''' 25 ''' ||''' POY CCD VIDEO CH25 ''' ||''' 58 ''' ||
|| 26 || OMC-V || 59 ||


Note that type 'TBD-1' is used for the orange colored cables which do not have any label about the cable characteristic on the surface

'''Output Channels'''

||''' Channel number ''' ||''' where its signal is sent ''' ||''' type ''' ||
|| 1 || unknown || 59 ||
||''' 2 ''' ||''' Monitor#2 ''' ||''' 58 ''' ||
|| 3 || Monitor#3 || 59 ||
|| 4 || Monitor#4 || 59 ||
||''' 5 ''' ||''' Monitor#5 ''' ||''' 58 ''' ||
|| 6 || Monitor#6 || 59 ||
||''' 7 ''' ||''' Monitor#7 ''' ||''' 58 ''' ||
|| 8 || "unknown labeled as ""PSL output monitor""" || 59 ||
|| 9 || Monitor#9 || 59 ||
|| 10 || Monitor#10 || 59 ||
|| 11 || Monitor#11 || 59 ||
|| 12 || Monitor#12 || 59 ||
|| 13 || Unknown || 59 ||
|| 14 || Monitor#14 || 59 ||
|| 15 || Monitor#15 || 59 ||
|| 16 || "unknown labeled as ""10""" || 59 ||
|| 17 || unknown || 59 ||
|| 18 || "unknown labeled as ""3B""" || 59 ||
||''' 19 ''' ||''' "unknown labeled as ""MON6 IR19""" ''' ||''' 58 ''' ||
|| 20 || unknown || 59 ||
|| 21 || unknown || 59 ||
|| 22 || unknown || 59 ||

Overview

Our new Video Switch is a [http://www.extron.com/product/product.aspx?id=mavplus3232v Extron MAV PLUS 3232].

attachment:mavpic.jpg

BRBR

how to restore the matrix

  1. access to http://192.168.113.92/ by an web browser

  2. go to the control tab in the top of the page

  3. go to the Global Presets in the left bar

  4. click 40M Default

BRBR

Setup Howto

  1. Connect ethernet cable directly to the videos switcher with a computer.
  2. from the computer, go to default switcher's address 192.168.254.254 by using web browser like firefox.
  3. if you can not see any pages in the browser, try telnet to 192.168.254.254 to check the connection.
  4. change the IP address, the Gateway address and subnet mask properly in the web page.
  5. put the video switcher into the network via another ethernet cable.
  6. you can access the switcher from anywhere in the 40m by using web browser
  7. connect analog video cables
  8. assign output-input matrix by accessing the switcher from an web browser

BRBR

Docs

attachment:manuel.pdf

attachment:quickref.pdf BR BR

Configuration

network

BRBR

channel assign

  • more information about output channels and monitors are below.

    channel assign

    INPUT

    channel

    camera

    state

    1

    MC2

    :)

    2

    Faraday

    :)

    3

    PSL output CAM

    -

    4

    BS

    :)

    5

    MC13

    :)

    6

    ITMX

    :)

    7

    ITMY

    :)

    8

    ETMX

    :)

    9

    ETMY

    :)

    10

    -

    -

    11

    RCR

    :)

    12

    RCT

    :)

    13

    OMCR

    -

    14

    PMCR

    :)

    15

    PSL IOO

    -

    16

    IMCT

    not aligned ?

    17

    PSL

    -

    18

    IMCR

    -

    19

    SPS

    :)

    20

    POB

    -

    21

    POX

    no camera

    22

    APS1

    :)

    23

    ETMXT

    not aligned

    24

    ETMYT

    no camera

    25

    POY

    no camera

    26

    OMCT

    :)

BRBR

monitors and output channels

  • monitos.png

ccd/monitor arrangement

attachment:CCD_OCT3.pdf attachment:CCD_OCT3.png

Input Channels

Channel number

where its signal is coming

type

1

C1:IO-VIDEO 1 MC2

TBD-1

2

FI CAMERA

59

3

PSL OUTPUT CAMERA

59

4

BS C:1O-VIDEO 4

TBD-1

5

MC1&3 C:1O-VIDEO 5

59

6

ITMX C:1O-VIDEO 6

TBD-1

7

C1:IO-VIDEO 7 ITMY

TBD-1

8

C1:IO-VIDEO 8 ETMX

TBD-1

9

C1:IO-VIDEO 9 ETMY

TBD-1

10

"No cable is connected (spare channel)"

11

C1:IO-VIDEO 11 RCR

59

12

C1:IO-VIDEO RCT

59

13

MCR VIDEO

59

14

C1:IO-VIDEO 14 PMCT

59

15

VIDEO 15 PSL IOO(OR IOC)

59

16

C1:IO-VIDEO 16 IMCT

TBD-1

17

PSL CAMERA

58

18

C1:IO-VIDEO 18 IMCR

59

19

C1:IO-VIDEO 19 SPS

59

20

C1:IO-VIDEO 20 BSPO

TBD-1

21

C1:IO-VIDEO 21 ITMXPO

TBD-1

22

C1:IO-VIDEO 22 APS1

59

23

ETMX-T

58

24

ETMY-T

58

25

POY CCD VIDEO CH25

58

26

OMC-V

59

Note that type 'TBD-1' is used for the orange colored cables which do not have any label about the cable characteristic on the surface

Output Channels

Channel number

where its signal is sent

type

1

unknown

59

2

Monitor#2

58

3

Monitor#3

59

4

Monitor#4

59

5

Monitor#5

58

6

Monitor#6

59

7

Monitor#7

58

8

"unknown labeled as ""PSL output monitor"""

59

9

Monitor#9

59

10

Monitor#10

59

11

Monitor#11

59

12

Monitor#12

59

13

Unknown

59

14

Monitor#14

59

15

Monitor#15

59

16

"unknown labeled as ""10"""

59

17

unknown

59

18

"unknown labeled as ""3B"""

59

19

"unknown labeled as ""MON6 IR19"""

58

20

unknown

59

21

unknown

59

22

unknown

59

Electronics/VideoMUX (last edited 2012-01-03 23:02:40 by localhost)