Diff for "Electronics/VideoMUX"

Differences between revisions 2 and 3

Overview

attachment:mavpic.jpg

Connect ethernet cable directly to the videos switcher with a computer.
from the computer, go to default switcher's address 192.168.254.254 by using web browser like firefox.
if you can not see any pages in the browser, try telnet to 192.168.254.254 to check the connection.
change the IP address, the Gateway address and subnet mask properly in the web page.
put the video switcher into the network via another ethernet cable.
you can access the switcher from anywhere in the 40m by using web browser
connect analog video cables
assign output-input matrix by accessing the switcher from an web browser

attachment:manuel.pdf

attachment:quickref.pdf

-  ⇤ ← Revision 2 as of 2009-12-29 08:14:09 → 
  Size: 253
  Editor: RanaAdhikari
  Comment:
+   ← Revision 3 as of 2009-12-29 09:16:55 → ⇥
  Size: 1028
  Editor: RanaAdhikari
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 7:
-.
 1.
 1.
+. Connect ethernet cable directly to the videos switcher with a computer.
 2. from the computer, go to default switcher's address 192.168.254.254 by using web browser like firefox. 
 3. if you can not see any pages in the browser, try telnet to 192.168.254.254 to check the connection.
 4. change the IP address, the Gateway address and subnet mask properly in the web page. 
 5. put the video switcher into the network via another ethernet cable.
 6. you can access the switcher from anywhere in the 40m by using web browser
 7. connect analog video cables
 8. assign output-input matrix by accessing the switcher from an web browser
-Line 16:
+Line 20:
+== Configuration ==
=== network ===
 * name = luciana
 * address = 131.215.113.92

=== network ===
 . input channels
 . output channels