Diff for "Electronics/VideoMUX"

Differences between revisions 19 and 29 (spanning 10 versions)

Overview

Our new Video Switch is a [http://www.extron.com/product/product.aspx?id=mavplus3232v Extron MAV PLUS 3232].

attachment:mavpic.jpg

BR BR

how to restore the matrix

access to http://192.168.113.92/ by an web browser
go to the control tab in the top of the page
go to the Global Presets in the left bar
click 40M Default

BR BR

Setup Howto

Connect ethernet cable directly to the videos switcher with a computer.
from the computer, go to default switcher's address 192.168.254.254 by using web browser like firefox.
if you can not see any pages in the browser, try telnet to 192.168.254.254 to check the connection.
change the IP address, the Gateway address and subnet mask properly in the web page.
put the video switcher into the network via another ethernet cable.
you can access the switcher from anywhere in the 40m by using web browser
connect analog video cables
assign output-input matrix by accessing the switcher from an web browser

BR BR

Docs

attachment:manuel.pdf

attachment:quickref.pdf BR BR

Configuration

network

name = LUCIANA
address = http://192.168.113.92/

BR BR

channel assign

more information about output channels and monitors are below.

channel assign
INPUT			OUTPUTS
channel	camera	state
1	MC2F
2	IFOPO
3	OMCR	-
4	FI
5	AS Spare
6	ITMYF
7	ITMXF
8	ETMYF
9	ETMXF
10	PMCR	-
11	RCR
12	RCT
13	PSL Spare	-
14	PMCT
15	ETMXT	-
16	MC2T
17	POP	-
18	IMCR	-
19	REFL
20	MC1F/MC3F	-
21	SRMF	no camera
22	AS
23	ETMYT	not aligned
24	PRM/BS	no camera
25	OMCT	no camera
25	OMCT	no camera

Note that this table shows the current channel assignment and that X is used for East arm and Y is used for South arm

BR BR

monitors and output channels

ccd/monitor arrangement

attachment:CCD_OCT3.pdf attachment:CCD_OCT3.png

Note that this diagram is for VIDEO system upgrades so Y is used for East arm and X is used for South arm.

Please use this diagram for just finding the rough position of monitor or cameras because the system is not upgraded yet.

Upgrade Plan is available at http://nodus.ligo.caltech.edu:8080/40m/4139

-  ⇤ ← Revision 19 as of 2010-11-13 10:01:37 → 
  Size: 5390
  Editor: KiwamuIzumi
  Comment:
+   ← Revision 29 as of 2011-03-31 03:58:21 → ⇥
  Size: 3003
  Editor: SureshDoravari
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 39:
- ||||||<style="text-align: center;">  '''INPUT''' ||
 || ''channel'' || ''camera'' || ''state'' ||
 || 1 ||   MC2 ||  :) ||
 || 2 ||  Faraday ||  :) ||
 || 3 ||  PSL output CAM ||  - ||
 || 4 ||   BS ||  :) ||
 || 5 ||    MC13 || :) ||
 || 6 ||   ITMX ||  :) ||
 || 7 ||   ITMY ||  :) ||
 || 8 ||   ETMX ||  :) ||
 || 9 ||   ETMY ||  :) ||
 || 10 ||     - ||  - ||
 || 11 ||   RCR ||  :) ||
 || 12 ||   RCT ||  :) ||
 || 13 ||   OMCR ||  - ||
 || 14 ||   PMCR ||  :) ||
 || 15 ||  PSL IOO ||  - ||
 || 16 ||   IMCT ||  not aligned ? ||
 || 17 ||    PSL ||  - ||
 || 18 ||   IMCR ||  - ||
 || 19 ||   SPS ||  :) ||
 || 20 ||   POB ||  - ||
 || 21 ||   POX ||  no camera ||
 || 22 ||   APS1 ||  :) ||
 || 23 ||   ETMXT ||  not aligned ||
 || 24 ||   ETMYT ||  no camera ||
 || 25 ||    POY ||  no camera ||
 || 26 ||    OMCT ||   :) ||
+ ||||||<style="text-align: center;">  '''INPUT''' ||'''OUTPUTS''' ||
 || ''channel'' || ''camera'' || ''state'' || ||
 || 1 ||   MC2F ||  :) || ||
 || 2 ||IFOPO ||  :) || ||
 || 3 ||  OMCR ||  - || ||
 || 4 ||   FI ||  :) || ||
 || 5 ||    AS Spare || :) || ||
 || 6 ||   ITMYF ||  :) || ||
 || 7 ||   ITMXF ||  :) || ||
 || 8 ||   ETMYF ||  :) || ||
 || 9 ||   ETMXF ||  :) || ||
 || 10 ||PMCR ||  - || ||
 || 11 ||   RCR ||  :) || ||
 || 12 ||   RCT ||  :) || ||
 || 13 ||   PSL Spare ||  - || ||
 || 14 ||   PMCT ||  :) || ||
 || 15 ||  ETMXT ||  - || ||
 || 16 ||   MC2T ||  :) || ||
 || 17 ||    POP ||  - || ||
 || 18 ||   IMCR ||  - || ||
 || 19 ||   REFL ||  :) || ||
 || 20 ||   MC1F/MC3F ||  - || ||
 || 21 ||SRMF ||  no camera || ||
 || 22 ||   AS ||  :) || ||
 || 23 ||   ETMYT ||  not aligned || ||
 || 24 ||   PRM/BS ||  no camera || ||
 || 25 ||    OMCT ||  no camera || ||
 || 25 ||    OMCT ||  no camera || ||
 Line 69:
+=== Note that this table shows the current channel assignment and that X is used for East arm and Y is used for South arm ===
 Line 72:
  . <<ImageLink(monitos.png, monitors and channels, height=150)>>
 Line 77:
-'''Input Channels'''
+'''Note that this diagram is for VIDEO system upgrades so Y is used for East arm and X is used for South arm. '''
 Line 79:
-||'''    Channel number    ''' ||'''    where its signal is coming    ''' ||'''    type    ''' ||
||'''    1    ''' ||'''    C1:IO-VIDEO 1 MC2    ''' ||'''    TBD-1    ''' ||
||    2 ||    FI CAMERA ||    59 ||
||    3 ||    PSL OUTPUT CAMERA ||    59 ||
||'''    4    ''' ||'''    BS  C:1O-VIDEO 4    ''' ||'''    TBD-1    ''' ||
||    5 ||    MC1&3 C:1O-VIDEO 5 ||    59 ||
||'''    6    ''' ||'''    ITMX C:1O-VIDEO 6    ''' ||'''    TBD-1    ''' ||
||'''    7    ''' ||'''    C1:IO-VIDEO 7 ITMY    ''' ||'''    TBD-1    ''' ||
||'''    8    ''' ||'''    C1:IO-VIDEO 8 ETMX    ''' ||'''    TBD-1    ''' ||
||'''    9    ''' ||'''    C1:IO-VIDEO 9 ETMY    ''' ||'''    TBD-1    ''' ||
||    10 ||    "No cable is connected (spare channel)" || ||
||    11 ||    C1:IO-VIDEO 11 RCR ||    59 ||
||    12 ||    C1:IO-VIDEO RCT ||    59 ||
||    13 ||    MCR VIDEO ||    59 ||
||    14 ||    C1:IO-VIDEO 14 PMCT ||    59 ||
||    15 ||    VIDEO 15 PSL IOO(OR IOC) ||    59 ||
||'''    16    ''' ||'''    C1:IO-VIDEO 16 IMCT    ''' ||'''    TBD-1    ''' ||
||'''    17    ''' ||'''    PSL CAMERA    ''' ||'''    58    ''' ||
||    18 ||    C1:IO-VIDEO 18 IMCR ||    59 ||
||    19 ||    C1:IO-VIDEO 19 SPS ||    59 ||
||'''    20    ''' ||'''    C1:IO-VIDEO 20 BSPO    ''' ||'''    TBD-1    ''' ||
||'''    21    ''' ||'''    C1:IO-VIDEO 21 ITMXPO    ''' ||'''    TBD-1    ''' ||
||    22 ||    C1:IO-VIDEO 22 APS1 ||    59 ||
||'''    23    ''' ||'''    ETMX-T    ''' ||'''    58    ''' ||
||'''    24    ''' ||'''    ETMY-T    ''' ||'''    58    ''' ||
||'''    25    ''' ||'''    POY CCD VIDEO CH25    ''' ||'''    58    ''' ||
||    26 ||    OMC-V ||    59 ||
+'''Please use this diagram for just finding the rough position of monitor or cameras because the system is not upgraded yet.'''
-Line 107:
+Line 81:
+'''Upgrade Plan is available at http://nodus.ligo.caltech.edu:8080/40m/4139 '''''' '''
-Line 108:
+Line 83:
-Note that type 'TBD-1' is used for the orange colored cables which do not have any label about the cable characteristic on the surface

'''Output Channels'''

||'''    Channel number    ''' ||'''    where its signal is sent    ''' ||'''    type    ''' ||
||    1 ||    unknown ||    59 ||
||'''    2    ''' ||'''    Monitor#2     ''' ||'''    58    ''' ||
||    3 ||    Monitor#3 ||    59 ||
||    4 ||    Monitor#4 ||    59 ||
||'''    5    ''' ||'''    Monitor#5    ''' ||'''    58    ''' ||
||    6 ||    Monitor#6 ||    59 ||
||'''    7    ''' ||'''    Monitor#7    ''' ||'''    58    ''' ||
||    8 ||    "unknown labeled as ""PSL output monitor""" ||    59 ||
||    9 ||    Monitor#9 ||    59 ||
||    10 ||    Monitor#10 ||    59 ||
||    11 ||    Monitor#11 ||    59 ||
||    12 ||    Monitor#12 ||    59 ||
||    13 ||    Unknown ||    59 ||
||    14 ||    Monitor#14 ||    59 ||
||    15 ||    Monitor#15 ||    59 ||
||    16 ||    "unknown labeled as ""10""" ||    59 ||
||    17 ||    unknown ||    59 ||
||    18 ||    "unknown labeled as ""3B""" ||    59 ||
||'''    19    ''' ||'''    "unknown  labeled as ""MON6 IR19"""    ''' ||'''    58    ''' ||
||    20 ||    unknown ||    59 ||
||    21 ||    unknown ||    59 ||
||    22 ||    unknown ||    59 ||
+''' '''