Diff for "Electronics/VideoMUX"

Differences between revisions 18 and 21 (spanning 3 versions)

Overview

Our new Video Switch is a [http://www.extron.com/product/product.aspx?id=mavplus3232v Extron MAV PLUS 3232].

attachment:mavpic.jpg

BR BR

how to restore the matrix

access to http://192.168.113.92/ by an web browser
go to the control tab in the top of the page
go to the Global Presets in the left bar
click 40M Default

BR BR

Setup Howto

Connect ethernet cable directly to the videos switcher with a computer.
from the computer, go to default switcher's address 192.168.254.254 by using web browser like firefox.
if you can not see any pages in the browser, try telnet to 192.168.254.254 to check the connection.
change the IP address, the Gateway address and subnet mask properly in the web page.
put the video switcher into the network via another ethernet cable.
you can access the switcher from anywhere in the 40m by using web browser
connect analog video cables
assign output-input matrix by accessing the switcher from an web browser

BR BR

Docs

attachment:manuel.pdf

attachment:quickref.pdf BR BR

Configuration

network

name = LUCIANA
address = http://192.168.113.92/

BR BR

channel assign

more information about output channels and monitors are below.

channel assign
INPUT
channel	camera	state
1	MC2
2	Faraday
3	PSL output CAM	-
4	BS
5	MC13
6	ITMX
7	ITMY
8	ETMX
9	ETMY
10	-	-
11	RCR
12	RCT
13	OMCR	-
14	PMCR
15	PSL IOO	-
16	PMCT
17	PSL	-
18	IMCR	-
19	SPS
20	POB	-
21	POX	no camera
22	APS1
23	ETMXT	not aligned
24	ETMYT	no camera
25	POY	no camera
26	OMCT

Note that this table shows the current channel assignment and that X is used for East arm and Y is used for South arm

BR BR

monitors and output channels

ccd/monitor arrangement

attachment:CCD_OCT3.pdf attachment:CCD_OCT3.png

Note that this diagram is for VIDEO system upgrades so Y is used for East arm and X is used for South arm.

Please use this diagram for just finding the rough position of monitor or cameras because the system is not upgraded yet.

-  ⇤ ← Revision 18 as of 2010-10-19 21:47:28 → 
  Size: 5408
  Editor: KojiArai
  Comment:
+   ← Revision 21 as of 2011-01-12 06:44:59 → ⇥
  Size: 2814
  Editor: JustinGarofoli
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 45:
- || 5 ||    MC13 ||  camera disconnected ||
+ || 5 ||    MC13 || :) ||
 Line 56:
- || 16 ||   IMCT ||  not aligned ? ||
+ || 16 ||   PMCT ||  :) ||
 Line 70:
+=== Note that this table shows the current channel assignment and that X is used for East arm and Y is used for South arm ===
-Line 72:
+Line 73:
  . <<ImageLink(monitos.png, monitors and channels, height=150)>>
-Line 77:
+Line 78:
-'''Input Channels'''
+'''Note that this diagram is for VIDEO system upgrades so Y is used for East arm and X is used for South arm. '''
-Line 79:
+Line 80:
-||'''    Channel number    ''' ||'''    where its signal is coming    ''' ||'''    type    ''' ||
||'''    1    ''' ||'''    C1:IO-VIDEO 1 MC2    ''' ||'''    TBD-1    ''' ||
||    2 ||    FI CAMERA ||    59 ||
||    3 ||    PSL OUTPUT CAMERA ||    59 ||
||'''    4    ''' ||'''    BS  C:1O-VIDEO 4    ''' ||'''    TBD-1    ''' ||
||    5 ||    MC1&3 C:1O-VIDEO 5 ||    59 ||
||'''    6    ''' ||'''    ITMX C:1O-VIDEO 6    ''' ||'''    TBD-1    ''' ||
||'''    7    ''' ||'''    C1:IO-VIDEO 7 ITMY    ''' ||'''    TBD-1    ''' ||
||'''    8    ''' ||'''    C1:IO-VIDEO 8 ETMX    ''' ||'''    TBD-1    ''' ||
||'''    9    ''' ||'''    C1:IO-VIDEO 9 ETMY    ''' ||'''    TBD-1    ''' ||
||    10 ||    "No cable is connected (spare channel)" || ||
||    11 ||    C1:IO-VIDEO 11 RCR ||    59 ||
||    12 ||    C1:IO-VIDEO RCT ||    59 ||
||    13 ||    MCR VIDEO ||    59 ||
||    14 ||    C1:IO-VIDEO 14 PMCT ||    59 ||
||    15 ||    VIDEO 15 PSL IOO(OR IOC) ||    59 ||
||'''    16    ''' ||'''    C1:IO-VIDEO 16 IMCT    ''' ||'''    TBD-1    ''' ||
||'''    17    ''' ||'''    PSL CAMERA    ''' ||'''    58    ''' ||
||    18 ||    C1:IO-VIDEO 18 IMCR ||    59 ||
||    19 ||    C1:IO-VIDEO 19 SPS ||    59 ||
||'''    20    ''' ||'''    C1:IO-VIDEO 20 BSPO    ''' ||'''    TBD-1    ''' ||
||'''    21    ''' ||'''    C1:IO-VIDEO 21 ITMXPO    ''' ||'''    TBD-1    ''' ||
||    22 ||    C1:IO-VIDEO 22 APS1 ||    59 ||
||'''    23    ''' ||'''    ETMX-T    ''' ||'''    58    ''' ||
||'''    24    ''' ||'''    ETMY-T    ''' ||'''    58    ''' ||
||'''    25    ''' ||'''    POY CCD VIDEO CH25    ''' ||'''    58    ''' ||
||    26 ||    OMC-V ||    59 ||
+'''Please use this diagram for just finding the rough position of monitor or cameras because the system is not upgraded yet.'''''' '''
-Line 107:
+Line 82:
-Note that type 'TBD-1' is used for the orange colored cables which do not have any label about the cable characteristic on the surface

'''Output Channels'''

||'''    Channel number    ''' ||'''    where its signal is sent    ''' ||'''    type    ''' ||
||    1 ||    unknown ||    59 ||
||'''    2    ''' ||'''    Monitor#2     ''' ||'''    58    ''' ||
||    3 ||    Monitor#3 ||    59 ||
||    4 ||    Monitor#4 ||    59 ||
||'''    5    ''' ||'''    Monitor#5    ''' ||'''    58    ''' ||
||    6 ||    Monitor#6 ||    59 ||
||'''    7    ''' ||'''    Monitor#7    ''' ||'''    58    ''' ||
||    8 ||    "unknown labeled as ""PSL output monitor""" ||    59 ||
||    9 ||    Monitor#9 ||    59 ||
||    10 ||    Monitor#10 ||    59 ||
||    11 ||    Monitor#11 ||    59 ||
||    12 ||    Monitor#12 ||    59 ||
||    13 ||    Unknown ||    59 ||
||    14 ||    Monitor#14 ||    59 ||
||    15 ||    Monitor#15 ||    59 ||
||    16 ||    "unknown labeled as ""10""" ||    59 ||
||    17 ||    unknown ||    59 ||
||    18 ||    "unknown labeled as ""3B""" ||    59 ||
||'''    19    ''' ||'''    "unknown  labeled as ""MON6 IR19"""    ''' ||'''    58    ''' ||
||    20 ||    unknown ||    59 ||
||    21 ||    unknown ||    59 ||
||    22 ||    unknown ||    59 ||
+''' '''