Overview

Our new Video Switch is a [http://www.extron.com/product/product.aspx?id=mavplus3232v Extron MAV PLUS 3232].

attachment:mavpic.jpg

BRBR

how to restore the matrix

1. access to http://192.168.113.92/ by an web browser

2. go to the control tab in the top of the page

3. go to the Global Presets in the left bar

4. click 40M Default

BRBR

Setup Howto

1. Connect ethernet cable directly to the videos switcher with a computer.
2. from the computer, go to default switcher's address 192.168.254.254 by using web browser like firefox.
3. if you can not see any pages in the browser, try telnet to 192.168.254.254 to check the connection.
4. change the IP address, the Gateway address and subnet mask properly in the web page.
5. put the video switcher into the network via another ethernet cable.
6. you can access the switcher from anywhere in the 40m by using web browser
7. connect analog video cables
8. assign output-input matrix by accessing the switcher from an web browser

BRBR

Docs

attachment:manuel.pdf

attachment:quickref.pdf BR BR

Configuration

network

• name = LUCIANA

• address = http://192.168.113.92/

BRBR

channel assign

• more information about output channels and monitors are below.

  channel assign
  INPUT
  channel	camera	state
  1	MC2
  2	Faraday
  3	PSL output CAM	-
  4	BS
  5	MC13
  6	ITMX
  7	ITMY
  8	ETMX
  9	ETMY
  10	-	-
  11	RCR
  12	RCT
  13	OMCR	-
  14	PMCR
  15	PSL IOO	-
  16	IMCT	not aligned ?
  17	PSL	-
  18	IMCR	-
  19	SPS
  20	POB	-
  21	POX	no camera
  22	APS1
  23	ETMXT	not aligned
  24	ETMYT	no camera
  25	POY	no camera
  26	OMCT

BRBR

monitors and output channels

ccd/monitor arrangement

attachment:CCD_OCT3.pdf attachment:CCD_OCT3.png

Input Channels

Note that type 'TBD-1' is used for the orange colored cables which do not have any label about the cable characteristic on the surface

Output Channels