Diff for "Electronics/VideoMUX"

Differences between revisions 17 and 20 (spanning 3 versions)

Overview

Our new Video Switch is a [http://www.extron.com/product/product.aspx?id=mavplus3232v Extron MAV PLUS 3232].

attachment:mavpic.jpg

BR BR

how to restore the matrix

access to http://192.168.113.92/ by an web browser
go to the control tab in the top of the page
go to the Global Presets in the left bar
click 40M Default

BR BR

Setup Howto

Connect ethernet cable directly to the videos switcher with a computer.
from the computer, go to default switcher's address 192.168.254.254 by using web browser like firefox.
if you can not see any pages in the browser, try telnet to 192.168.254.254 to check the connection.
change the IP address, the Gateway address and subnet mask properly in the web page.
put the video switcher into the network via another ethernet cable.
you can access the switcher from anywhere in the 40m by using web browser
connect analog video cables
assign output-input matrix by accessing the switcher from an web browser

BR BR

Docs

attachment:manuel.pdf

attachment:quickref.pdf BR BR

Configuration

network

name = LUCIANA
address = http://192.168.113.92/

BR BR

channel assign

more information about output channels and monitors are below.

channel assign
INPUT
channel	camera	state
1	MC2
2	Faraday
3	PSL output CAM	-
4	BS
5	MC13
6	ITMX
7	ITMY
8	ETMX
9	ETMY
10	-	-
11	RCR
12	RCT
13	OMCR	-
14	PMCR
15	PSL IOO	-
16	PMCT
17	PSL	-
18	IMCR	-
19	SPS
20	POB	-
21	POX	no camera
22	APS1
23	ETMXT	not aligned
24	ETMYT	no camera
25	POY	no camera
26	OMCT

BR BR

monitors and output channels

ccd/monitor arrangement

attachment:CCD_OCT3.pdf attachment:CCD_OCT3.png

Input Channels

Channel number	where its signal is coming	type
1	C1:IO-VIDEO 1 MC2	TBD-1
2	FI CAMERA	59
3	PSL OUTPUT CAMERA	59
4	BS C:1O-VIDEO 4	TBD-1
5	MC1&3 C:1O-VIDEO 5	59
6	ITMX C:1O-VIDEO 6	TBD-1
7	C1:IO-VIDEO 7 ITMY	TBD-1
8	C1:IO-VIDEO 8 ETMX	TBD-1
9	C1:IO-VIDEO 9 ETMY	TBD-1
10	"No cable is connected (spare channel)"
11	C1:IO-VIDEO 11 RCR	59
12	C1:IO-VIDEO RCT	59
13	MCR VIDEO	59
14	C1:IO-VIDEO 14 PMCT	59
15	VIDEO 15 PSL IOO(OR IOC)	59
16	C1:IO-VIDEO 16 PMCT	TBD-1
17	PSL CAMERA	58
18	C1:IO-VIDEO 18 IMCR	59
19	C1:IO-VIDEO 19 SPS	59
20	C1:IO-VIDEO 20 BSPO	TBD-1
21	C1:IO-VIDEO 21 ITMXPO	TBD-1
22	C1:IO-VIDEO 22 APS1	59
23	ETMX-T	58
24	ETMY-T	58
25	POY CCD VIDEO CH25	58
26	OMC-V	59

Note that type 'TBD-1' is used for the orange colored cables which do not have any label about the cable characteristic on the surface

Output Channels

Channel number	where its signal is sent	type
1	unknown	59
2	Monitor#2	58
3	Monitor#3	59
4	Monitor#4	59
5	Monitor#5	58
6	Monitor#6	59
7	Monitor#7	58
8	"unknown labeled as ""PSL output monitor"""	59
9	Monitor#9	59
10	Monitor#10	59
11	Monitor#11	59
12	Monitor#12	59
13	Unknown	59
14	Monitor#14	59
15	Monitor#15	59
16	"unknown labeled as ""10"""	59
17	unknown	59
18	"unknown labeled as ""3B"""	59
19	"unknown labeled as ""MON6 IR19"""	58
20	unknown	59
21	unknown	59
22	unknown	59

-  ⇤ ← Revision 17 as of 2010-10-19 21:45:52 → 
  Size: 5526
  Editor: KojiArai
  Comment:
+   ← Revision 20 as of 2010-11-19 06:08:59 → ⇥
  Size: 5379
  Editor: KojiArai
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 6:
-[[BR]]
[[BR]]
+[[BR]][[BR]]
-Line 16:
+Line 13:
-[[BR]]
[[BR]]
+[[BR]][[BR]]
-Line 27:
+Line 23:
-[[BR]]
[[BR]]
-Line 30:
+Line 24:
+[[BR]][[BR]]
-Line 33:
+Line 28:
-attachment:quickref.pdf
[[BR]]
[[BR]]
+attachment:quickref.pdf [[BR]] [[BR]]
-Line 41:
+Line 34:
-[[BR]]
[[BR]]
-Line 44:
+Line 35:
+[[BR]][[BR]]
-Line 46:
+Line 38:
+ ||||||||<style="text-align: center;">''' channel assign''' ||
 ||||||<style="text-align: center;">  '''INPUT''' ||
 || ''channel'' || ''camera'' || ''state'' ||
 || 1 ||   MC2 ||  :) ||
 || 2 ||  Faraday ||  :) ||
 || 3 ||  PSL output CAM ||  - ||
 || 4 ||   BS ||  :) ||
 || 5 ||    MC13 || :) ||
 || 6 ||   ITMX ||  :) ||
 || 7 ||   ITMY ||  :) ||
 || 8 ||   ETMX ||  :) ||
 || 9 ||   ETMY ||  :) ||
 || 10 ||     - ||  - ||
 || 11 ||   RCR ||  :) ||
 || 12 ||   RCT ||  :) ||
 || 13 ||   OMCR ||  - ||
 || 14 ||   PMCR ||  :) ||
 || 15 ||  PSL IOO ||  - ||
 || 16 ||   PMCT ||  :) ||
 || 17 ||    PSL ||  - ||
 || 18 ||   IMCR ||  - ||
 || 19 ||   SPS ||  :) ||
 || 20 ||   POB ||  - ||
 || 21 ||   POX ||  no camera ||
 || 22 ||   APS1 ||  :) ||
 || 23 ||   ETMXT ||  not aligned ||
 || 24 ||   ETMYT ||  no camera ||
 || 25 ||    POY ||  no camera ||
 || 26 ||    OMCT ||   :) ||
-Line 47:
+Line 68:
- ||||||||<#FF8080>''' channel assign'''||
 ||||||<#80FF80>  '''INPUT'''||
 || ''channel'' || ''camera'' || ''state'' ||
 || 1     ||   MC2    ||  :)     ||
 || 2     ||  Faraday ||  :)     ||
 || 3     ||  PSL output CAM||  -    ||
 || 4     ||   BS     ||  :)     ||
 || 5     ||    MC13  ||  camera disconnected    ||
 || 6     ||   ITMX   ||  :)     ||
 || 7     ||   ITMY   ||  :)     ||
 || 8     ||   ETMX   ||  :)     ||
 || 9     ||   ETMY   ||  :)     ||
 || 10    ||     -    ||  -   ||
 || 11    ||   RCR    ||  :)    ||
 || 12    ||   RCT    ||  :)    ||
 || 13    ||   OMCR   ||  -   ||
 || 14    ||   PMCR   ||  :)    ||
 || 15    ||  PSL IOO ||  -    ||
 || 16    ||   IMCT   ||  not aligned ?    ||
 || 17    ||    PSL   ||  -    ||
 || 18    ||   IMCR   ||  -    ||
 || 19    ||   SPS    ||  :)    ||
 || 20    ||   POB    ||  -    ||
 || 21    ||   POX    ||  no camera    ||
 || 22    ||   APS1   ||  :)    ||
 || 23    ||   ETMXT  ||  not aligned    ||
 || 24    ||   ETMYT  ||  no camera      ||
 || 25    ||    POY   ||  no camera      ||
 || 26    ||    OMCT  ||   :)     ||
[[BR]]
[[BR]]
-Line 79:
+Line 69:
+[[BR]][[BR]]
-Line 80:
+Line 72:
-     <<ImageLink(monitos.png, monitors and channels, height=150)>>
+ . <<ImageLink(monitos.png, monitors and channels, height=150)>>
-Line 83:
+Line 75:
-attachment:CCD_OCT3.pdf
attachment:CCD_OCT3.png
+attachment:CCD_OCT3.pdf attachment:CCD_OCT3.png
-Line 88:
+Line 78:
-                         ||    Channel number    ||    where its signal is coming    ||    type    ||
||    1    ||    C1:IO-VIDEO 1 MC2    ||    TBD-1    ||
||    2    ||    FI CAMERA    ||    59    ||
||    3    ||    PSL OUTPUT CAMERA    ||    59    ||
||    4    ||    BS  C:1O-VIDEO 4    ||    TBD-1    ||
||    5    ||    MC1&3 C:1O-VIDEO 5    ||    59    ||
||    6    ||    ITMX C:1O-VIDEO 6    ||    TBD-1    ||
||    7    ||    C1:IO-VIDEO 7 ITMY    ||    TBD-1    ||
||    8    ||    C1:IO-VIDEO 8 ETMX    ||    TBD-1    ||
||    9    ||    C1:IO-VIDEO 9 ETMY    ||    TBD-1    ||
||    10    ||    "No cable is connected (spare channel)"    ||        ||
||    11    ||    C1:IO-VIDEO 11 RCR    ||    59    ||
||    12    ||    C1:IO-VIDEO RCT    ||    59    ||
||    13    ||    MCR VIDEO    ||    59    ||
||    14    ||    C1:IO-VIDEO 14 PMCT    ||    59    ||
||    15    ||    VIDEO 15 PSL IOO(OR IOC)    ||    59    ||
||    16    ||    C1:IO-VIDEO 16 IMCT    ||    TBD-1    ||
||    17    ||    PSL CAMERA    ||    58    ||
||    18    ||    C1:IO-VIDEO 18 IMCR    ||    59    ||
||    19    ||    C1:IO-VIDEO 19 SPS    ||    59    ||
||    20    ||    C1:IO-VIDEO 20 BSPO    ||    TBD-1    ||
||    21    ||    C1:IO-VIDEO 21 ITMXPO    ||    TBD-1    ||
||    22    ||    C1:IO-VIDEO 22 APS1    ||    59    ||
||    23    ||    ETMX-T    ||    58    ||
||    24    ||    ETMY-T    ||    58    ||
||    25    ||    POY CCD VIDEO CH25    ||    58    ||
||    26    ||    OMC-V    ||    59    ||
-Line 117:
+Line 79:
-Note that type 'TBD-1' is used for the orange colored cables which do not have any label about the cable characteristic on the surface
+||'''    Channel number    ''' ||'''    where its signal is coming    ''' ||'''    type    ''' ||
||'''    1    ''' ||'''    C1:IO-VIDEO 1 MC2    ''' ||'''    TBD-1    ''' ||
||    2 ||    FI CAMERA ||    59 ||
||    3 ||    PSL OUTPUT CAMERA ||    59 ||
||'''    4    ''' ||'''    BS  C:1O-VIDEO 4    ''' ||'''    TBD-1    ''' ||
||    5 ||    MC1&3 C:1O-VIDEO 5 ||    59 ||
||'''    6    ''' ||'''    ITMX C:1O-VIDEO 6    ''' ||'''    TBD-1    ''' ||
||'''    7    ''' ||'''    C1:IO-VIDEO 7 ITMY    ''' ||'''    TBD-1    ''' ||
||'''    8    ''' ||'''    C1:IO-VIDEO 8 ETMX    ''' ||'''    TBD-1    ''' ||
||'''    9    ''' ||'''    C1:IO-VIDEO 9 ETMY    ''' ||'''    TBD-1    ''' ||
||    10 ||    "No cable is connected (spare channel)" || ||
||    11 ||    C1:IO-VIDEO 11 RCR ||    59 ||
||    12 ||    C1:IO-VIDEO RCT ||    59 ||
||    13 ||    MCR VIDEO ||    59 ||
||    14 ||    C1:IO-VIDEO 14 PMCT ||    59 ||
||    15 ||    VIDEO 15 PSL IOO(OR IOC) ||    59 ||
||'''    16    ''' ||'''    C1:IO-VIDEO 16 PMCT    ''' ||'''    TBD-1    ''' ||
||'''    17    ''' ||'''    PSL CAMERA    ''' ||'''    58    ''' ||
||    18 ||    C1:IO-VIDEO 18 IMCR ||    59 ||
||    19 ||    C1:IO-VIDEO 19 SPS ||    59 ||
||'''    20    ''' ||'''    C1:IO-VIDEO 20 BSPO    ''' ||'''    TBD-1    ''' ||
||'''    21    ''' ||'''    C1:IO-VIDEO 21 ITMXPO    ''' ||'''    TBD-1    ''' ||
||    22 ||    C1:IO-VIDEO 22 APS1 ||    59 ||
||'''    23    ''' ||'''    ETMX-T    ''' ||'''    58    ''' ||
||'''    24    ''' ||'''    ETMY-T    ''' ||'''    58    ''' ||
||'''    25    ''' ||'''    POY CCD VIDEO CH25    ''' ||'''    58    ''' ||
||    26 ||    OMC-V ||    59 ||


Note that type 'TBD-1' is used for the orange colored cables which do not have any label about the cable characteristic on the surface
-Line 121:
+Line 112:
-||    Channel number    ||    where its signal is sent    ||    type    ||
||    1    ||    unknown    ||    59    ||
||    2    ||    Monitor#2     ||    58    ||
||    3    ||    Monitor#3    ||    59    ||
||    4    ||    Monitor#4    ||    59    ||
||    5    ||    Monitor#5    ||    58    ||
||    6    ||    Monitor#6    ||    59    ||
||    7    ||    Monitor#7    ||    58    ||
||    8    ||    "unknown labeled as ""PSL output monitor"""    ||    59    ||
||    9    ||    Monitor#9    ||    59    ||
||    10    ||    Monitor#10    ||    59    ||
||    11    ||    Monitor#11    ||    59    ||
||    12    ||    Monitor#12    ||    59    ||
||    13    ||    Unknown    ||    59    ||
||    14    ||    Monitor#14    ||    59    ||
||    15    ||    Monitor#15    ||    59    ||
||    16    ||    "unknown labeled as ""10"""    ||    59    ||
||    17    ||    unknown    ||    59    ||
||    18    ||    "unknown labeled as ""3B"""    ||    59    ||
||    19    ||    "unknown  labeled as ""MON6 IR19"""    ||    58    ||
||    20    ||    unknown    ||    59    ||
||    21    ||    unknown    ||    59    ||
||    22    ||    unknown    ||    59    ||
+||'''    Channel number    ''' ||'''    where its signal is sent    ''' ||'''    type    ''' ||
||    1 ||    unknown ||    59 ||
||'''    2    ''' ||'''    Monitor#2     ''' ||'''    58    ''' ||
||    3 ||    Monitor#3 ||    59 ||
||    4 ||    Monitor#4 ||    59 ||
||'''    5    ''' ||'''    Monitor#5    ''' ||'''    58    ''' ||
||    6 ||    Monitor#6 ||    59 ||
||'''    7    ''' ||'''    Monitor#7    ''' ||'''    58    ''' ||
||    8 ||    "unknown labeled as ""PSL output monitor""" ||    59 ||
||    9 ||    Monitor#9 ||    59 ||
||    10 ||    Monitor#10 ||    59 ||
||    11 ||    Monitor#11 ||    59 ||
||    12 ||    Monitor#12 ||    59 ||
||    13 ||    Unknown ||    59 ||
||    14 ||    Monitor#14 ||    59 ||
||    15 ||    Monitor#15 ||    59 ||
||    16 ||    "unknown labeled as ""10""" ||    59 ||
||    17 ||    unknown ||    59 ||
||    18 ||    "unknown labeled as ""3B""" ||    59 ||
||'''    19    ''' ||'''    "unknown  labeled as ""MON6 IR19"""    ''' ||'''    58    ''' ||
||    20 ||    unknown ||    59 ||
||    21 ||    unknown ||    59 ||
||    22 ||    unknown ||    59 ||