Diff for "Electronics/RF_System/frequency_generation_box"

Differences between revisions 9 and 17 (spanning 8 versions)

The 40m Upgrade Frequency Generation Box is going to be installed in the 1Y1 rack. It will be used to generate the modulation and the demodulation frequencies.

Contents

Picures
Things to do
Parts
Links

Picures

This is the first picture as I start putting it together.

Things to do

get parts
cut 5 3x3" copper sheets

Parts

Assembling Parts

Part	Function	Description	Provider	SN	Q.ty	Status
Teflon sheet	base mounting plate	12"x24"x3/8"	McMaster	8545K37	2	to order
stainless steel spacers	plate support	3/8" Thick, 12" X 12"	McMaster	[http://www.mcmaster.com/itm/find.ASP?tab=find&context=psrchDtlLink&fasttrack=False&searchstring=91125A453 91125A453]	20	to order
LIGO std power connector	power feed thru	4-pin	Downs lab	drill room bin 108/6	2	to get
power splitter	ground splitter	-	-	-	-	-
N-to-SMA connector	thru connector	-	-	-	-	-
clamps	holding component on plate	-	Mike	-	-	-

RF Components

Part	Provider	SN	Q.ty	Status
Power Splitter	Digi Key	ZFRSC-42+	4	to order

Links

[http://www.ligo.caltech.edu/~costheld/ Chub's Web Page with lots of electronics diagrams and pictures]

Electronics/RF_System/frequency_generation_box (last edited 2013-04-24 20:44:28 by SureshdoravariATligoDOTorg)

-  ⇤ ← Revision 9 as of 2010-05-26 17:44:31 → 
  Size: 1349
  Editor: AlbertoStochino
  Comment:
+   ← Revision 17 as of 2010-05-27 02:18:14 → ⇥
  Size: 1469
  Editor: AlbertoStochino
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 8:
-<<ImageLink(FrequencyGenerationBox.jpg, width=1000)>>
+<<ImageLink(Visio-frequencyGenerationBox_wiringSchematic.png, width=1000)>>

== Things to do ==
 1. get parts
 1. cut 5 3x3" copper sheets
-Line 14:
+Line 18:
-|| '''Part''' || '''Function''' || ''Description'' || '''Provider''' || '''SN''' || '''Q.ty''' || '''Status''' ||
|| Teflon sheet || base mounting plate || 12"x13"x3/8" || McMaster || [http://www.mcmaster.com/itm/find.ASP?tab=find&context=psrchDtlLink&fasttrack=False&searchstring=8545K27 8545K27] || 2 || to order ||
+|| '''Part''' || '''Function''' || '''Description''' || '''Provider''' || '''SN''' || '''Q.ty''' || '''Status''' ||
|| Teflon sheet || base mounting plate || 12"x24"x3/8" || McMaster || 8545K37 || 2 || to order ||
-Line 19:
+Line 23:
-|| clamps || holding component on plate || - || - || - || - || - ||
|| electrical tape || general || - || - || 76455A22 || 3 || to order ||
+|| N-to-SMA connector || thru connector || - || - || - || - || - ||
|| clamps || holding component on plate || - || Mike || - || - || - ||
-Line 23:
+Line 27:
+|| '''Part''' || '''Provider''' || '''SN''' || '''Q.ty''' || '''Status''' ||
|| Power Splitter || Digi Key || ZFRSC-42+ || 4 || to order ||