Differences between revisions 5 and 6
⇤ ← Revision 5 as of 2010-05-26 16:59:59 →
Size: 341
Editor: AlbertoStochino
Comment:
← Revision 6 as of 2010-05-26 17:09:22 → ⇥
Size: 561
Editor: AlbertoStochino
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
The 40m Upgrade Frequency Generation Box is going to going to be installed in the 1Y1 rack. It is going to generate the modulation and the demodulation frequencies. The 40m Upgrade Frequency Generation Box is going to be installed in the 1Y1 rack. It will be used to generate the modulation and the demodulation frequencies.
Line 11: Line 11:

 * Teflon sheet: 12"x13"x3/8" [http://www.mcmaster.com/#sheets-%28made-with-teflon-ptfe%29/=79aqgf from McMaster]
 * Ceramic Spacers:
 * LIGO Standard 4-pin power connector (in Downs, drill room bin 108/6)
 *

== Links ==

The 40m Upgrade Frequency Generation Box is going to be installed in the 1Y1 rack. It will be used to generate the modulation and the demodulation frequencies.

Contents

  1. Picures
  2. Assembling Parts
  3. Links

Picures

This is the first picture as I start putting it together.

FrequencyGenerationBox.jpg

Assembling Parts

Electronics/RF_System/frequency_generation_box (last edited 2013-04-24 20:44:28 by SureshdoravariATligoDOTorg)