Diff for "Electronics/RF_System/frequency_generation_box"

Differences between revisions 4 and 9 (spanning 5 versions)

The 40m Upgrade Frequency Generation Box is going to be installed in the 1Y1 rack. It will be used to generate the modulation and the demodulation frequencies.

Contents

Picures
Parts
Links

Picures

This is the first picture as I start putting it together.

Parts

Assembling Parts

Part	Function	Description	Provider	SN	Q.ty	Status
Teflon sheet	base mounting plate	12"x13"x3/8"	McMaster	[http://www.mcmaster.com/itm/find.ASP?tab=find&context=psrchDtlLink&fasttrack=False&searchstring=8545K27 8545K27]	2	to order
stainless steel spacers	plate support	3/8" Thick, 12" X 12"	McMaster	[http://www.mcmaster.com/itm/find.ASP?tab=find&context=psrchDtlLink&fasttrack=False&searchstring=91125A453 91125A453]	20	to order
LIGO std power connector	power feed thru	4-pin	Downs lab	drill room bin 108/6	2	to get
power splitter	ground splitter	-	-	-	-	-
clamps	holding component on plate	-	-	-	-	-
electrical tape	general	-	-	76455A22	3	to order

RF Components

Links

[http://www.ligo.caltech.edu/~costheld/ Chub's Web Page with lots of electronics diagrams and pictures]

Electronics/RF_System/frequency_generation_box (last edited 2013-04-24 20:44:28 by SureshdoravariATligoDOTorg)

-  ⇤ ← Revision 4 as of 2010-05-26 16:58:45 → 
  Size: 302
  Editor: AlbertoStochino
  Comment:
+   ← Revision 9 as of 2010-05-26 17:44:31 → ⇥
  Size: 1349
  Editor: AlbertoStochino
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-Th 40m Upgrade Frequency Generation Box is going to going to be installed in the 1Y1 rack. It is going to generate the modulation and the demodulation frequencies.
+The 40m Upgrade Frequency Generation Box is going to be installed in the 1Y1 rack. It will be used to generate the modulation and the demodulation frequencies.
 Line 3:
+<<TableOfContents(2)>>

== Picures ==
-Line 7:
+Line 10:
-<<TableOfContents(2)>>
+== Parts ==

=== Assembling Parts ===

|| '''Part''' || '''Function''' || ''Description'' || '''Provider''' || '''SN''' || '''Q.ty''' || '''Status''' ||
|| Teflon sheet || base mounting plate || 12"x13"x3/8" || McMaster || [http://www.mcmaster.com/itm/find.ASP?tab=find&context=psrchDtlLink&fasttrack=False&searchstring=8545K27 8545K27] || 2 || to order ||
|| stainless steel spacers || plate support || 3/8" Thick, 12" X 12" || McMaster || [http://www.mcmaster.com/itm/find.ASP?tab=find&context=psrchDtlLink&fasttrack=False&searchstring=91125A453 91125A453] || 20 || to order ||
|| LIGO std power connector || power feed thru || 4-pin || Downs lab || drill room bin 108/6 || 2 || to get ||
|| power splitter || ground splitter || - || - || - || - || - ||
|| clamps || holding component on plate || - || - || - || - || - ||
|| electrical tape || general || - || - || 76455A22 || 3 || to order ||

=== RF Components ===

== Links ==
[http://www.ligo.caltech.edu/~costheld/ Chub's Web Page with lots of electronics diagrams and pictures]