Diff for "Electronics/RF_System/frequency_generation_box"

Differences between revisions 2 and 24 (spanning 22 versions)

The 40m Upgrade Frequency Generation Box is going to be installed in the 1Y1 rack. It will be used to generate the modulation and the demodulation frequencies.

Contents

Picures
Things to do
Parts
Links

Picures

This is the first picture as I start putting it together.

Things to do

get parts
cut 5 3x3" copper sheets

Parts

Assembling Parts

Part	Function	Description	Provider	SN	Q.ty	Status
Teflon sheet	base mounting plate	12"x24"x3/8"	[http://www.mcmaster.com/# McMaster]	8545K37	2	to order
stainless steel spacers	plate support	1/4" OD, 3/8" Length, 8-32	[http://www.mcmaster.com/# McMaster]	91125A453	20	to order
LIGO std power connector	power feed thru	4-pin	Downs lab	drill room bin 108/6	2	to get from Wilson House
clamps	holding component on plate	[attachment:bracket.png drawing]	Mike	-	12	to order

RF Components

Part	Provider	SN	Q.ty	Status
Power Splitter	Digi Key	ZFRSC-42+	4	to order

Links

[http://www.ligo.caltech.edu/~costheld/ Chub's Web Page with lots of electronics diagrams and pictures]

Electronics/RF_System/frequency_generation_box (last edited 2013-04-24 20:44:28 by SureshdoravariATligoDOTorg)

-  ⇤ ← Revision 2 as of 2010-05-26 16:55:55 → 
  Size: 290
  Editor: AlbertoStochino
  Comment:
+   ← Revision 24 as of 2010-05-28 14:33:52 → ⇥
  Size: 1347
  Editor: AlbertoStochino
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-Th 40m Upgrade Frequency Generation Box is going to going to be installed in the 1Y1 rack. It is going to generate the modulation and the demodulation frequencies.
+The 40m Upgrade Frequency Generation Box is going to be installed in the 1Y1 rack. It will be used to generate the modulation and the demodulation frequencies.
 Line 3:
+<<TableOfContents(2)>>

== Picures ==
-Line 5:
+Line 8:
-attachment:FrequencyGenerationBox.jpg
+<<ImageLink(Visio-frequencyGenerationBox_wiringSchematic.png, width=1000)>>
-Line 7:
+Line 10:
-[[IndexOfContents]]
+== Things to do ==
 1. get parts
 1. cut 5 3x3" copper sheets

== Parts ==

=== Assembling Parts ===

|| '''Part''' || '''Function''' || '''Description''' || '''Provider''' || '''SN''' || '''Q.ty''' || '''Status''' ||
|| Teflon sheet || base mounting plate || 12"x24"x3/8" || [http://www.mcmaster.com/# McMaster] || 8545K37 || 2 || to order ||
|| stainless steel spacers || plate support || 1/4" OD, 3/8" Length, 8-32  || [http://www.mcmaster.com/# McMaster] || 91125A453 || 20 || to order ||
|| LIGO std power connector || power feed thru || 4-pin || Downs lab || drill room bin 108/6 || 2 || to get from Wilson House ||
|| clamps || holding component on plate || [attachment:bracket.png drawing] || Mike || - || 12 || to order ||

=== RF Components ===
|| '''Part''' || '''Provider''' || '''SN''' || '''Q.ty''' || '''Status''' ||
|| Power Splitter || Digi Key || ZFRSC-42+ || 4 || to order ||

== Links ==
[http://www.ligo.caltech.edu/~costheld/ Chub's Web Page with lots of electronics diagrams and pictures]