Diff for "Electronics/RF_System/frequency_generation_box"

Differences between revisions 10 and 16 (spanning 6 versions)

The 40m Upgrade Frequency Generation Box is going to be installed in the 1Y1 rack. It will be used to generate the modulation and the demodulation frequencies.

Contents

Picures
Parts
Links

Picures

This is the first picture as I start putting it together.

Parts

Assembling Parts

Part	Function	Description	Provider	SN	Q.ty	Status
Teflon sheet	base mounting plate	12"x24"x3/8"	McMaster	8545K37	2	to order
stainless steel spacers	plate support	3/8" Thick, 12" X 12"	McMaster	[http://www.mcmaster.com/itm/find.ASP?tab=find&context=psrchDtlLink&fasttrack=False&searchstring=91125A453 91125A453]	20	to order
LIGO std power connector	power feed thru	4-pin	Downs lab	drill room bin 108/6	2	to get
power splitter	ground splitter	-	-	-	-	-
N-to-SMA connector	thru connector	-	-	-	-	-
clamps	holding component on plate	-	Mike	-	-	-

RF Components

Part	Provider	SN	Q.ty	Status
Power Splitter	Digi Key	ZFRSC-42+	4	to order

Links

[http://www.ligo.caltech.edu/~costheld/ Chub's Web Page with lots of electronics diagrams and pictures]

Electronics/RF_System/frequency_generation_box (last edited 2013-04-24 20:44:28 by SureshdoravariATligoDOTorg)

-  ⇤ ← Revision 10 as of 2010-05-26 18:15:14 → 
  Size: 1404
  Editor: AlbertoStochino
  Comment:
+   ← Revision 16 as of 2010-05-27 01:52:39 → ⇥
  Size: 1406
  Editor: AlbertoStochino
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 8:
-<<ImageLink(FrequencyGenerationBox.jpg, width=1000)>>
+<<ImageLink(Visio-frequencyGenerationBox_wiringSchematic.png, width=1000)>>
 Line 14:
-|| '''Part''' || '''Function''' || ''Description'' || '''Provider''' || '''SN''' || '''Q.ty''' || '''Status''' ||
|| Teflon sheet || base mounting plate || 12"x13"x3/8" || McMaster || [http://www.mcmaster.com/itm/find.ASP?tab=find&context=psrchDtlLink&fasttrack=False&searchstring=8545K27 8545K27] || 2 || to order ||
+|| '''Part''' || '''Function''' || '''Description''' || '''Provider''' || '''SN''' || '''Q.ty''' || '''Status''' ||
|| Teflon sheet || base mounting plate || 12"x24"x3/8" || McMaster || 8545K37 || 2 || to order ||
 Line 19:
-|| N-to-SMA cables || - || - || - || - || - || - ||
+|| N-to-SMA connector || thru connector || - || - || - || - || - ||
 Line 21:
-|| electrical tape || general || - || - || 76455A22 || 3 || to order ||
-Line 24:
+Line 23:
+|| '''Part''' || '''Provider''' || '''SN''' || '''Q.ty''' || '''Status''' ||
|| Power Splitter || Digi Key || ZFRSC-42+ || 4 || to order ||