Differences between revisions 14 and 15
⇤ ← Revision 14 as of 2011-11-05 02:00:39 →
Size: 1511
Editor: KiwamuIzumi
Comment:
← Revision 15 as of 2011-11-05 02:00:51 → ⇥
Size: 1501
Editor: KiwamuIzumi
Comment:
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
= RF Frequency Distribution box = = RF Distribution box =

Contents

  1. RF Distribution box
  2. Latest Diagram
  3. Pictures
  4. Plans
  5. Early Thoughts
    1. 40m Upgrade RF Distribution Box

RF Distribution box

  • The box is going to be installed in the LSC rack. It will get the demodulation signals from the frequency generation box and it will split it into several output so that it can be used by the demodulation boards. The box is also going to generate frequency multiples as 3xf1, 3xf2, 2xf1 and 2xf2 demod signals.

Latest Diagram

  • attachment:RFdistributionbox_1027_2011.png

Pictures

  • This is how the Frequency Distribution Box is going to look like.

  • FrequencyDistributionBox.jpg

Plans

  • RF Distribution

    • 1. Construction of Frequency Distribution Box
    • exactly the same as for the frequency generation box
    • 1. Demod board filter upgrade: installation of surface mount low pass/high pass filter
    • 1. LSC rack routing

BR

Early Thoughts

40m Upgrade RF Distribution Box

  • This box will serve to split the RF signal coming from the RF Modulation Generator into the signals to be fed to the demod boards.

  • It will distribute both 11 and 55 MHz frequencies. It will also provide the 3f demod signals.
  • The box will contain 2 8-way power splitters, 2 frequency triplers, 2 2-way power splitters.
  • The box will have to be powered.

Electronics/RF_System/frequency_distribution_box (last edited 2012-01-03 23:02:38 by localhost)