|
Size: 545
Comment:
|
Size: 1424
Comment: The naming convention was obsolte
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| This page describes the 40m Upgrade Frequency Distribution Box. | ## page was renamed from Upgrade 09/RF System/frequency distribution box This page describes the 40m Upgrade '''Frequency Distribution Box'''. |
| Line 3: | Line 4: |
| The box is going to be installed in the LSC rack. It will get the demodulation signals from the [[/frequency generation box]] and it will split it into several output so that it can be used by the demodulation boards. | The box is going to be installed in the LSC rack. It will get the demodulation signals from the [[/frequency generation box|frequency generation box]] and it will split it into several output so that it can be used by the demodulation boards. |
| Line 10: | Line 11: |
| Line 13: | Line 15: |
== Plans == ## moved from Upgrade 09/RF System/schedule/RF Distribution '''RF Distribution''' 1. Construction of Frequency Distribution Box a. exactly the same as for the frequency generation box 1. Demod board filter upgrade: installation of surface mount low pass/high pass filter 1. LSC rack routing = Early Thoughts = == 40m Upgrade RF Distribution Box == This box will serve to split the RF signal coming from the [[Upgrade 09/RF System/RF_Modulation_Generator|RF Modulation Generator]] into the signals to be fed to the demod boards. It will distribute both 11 and 55 MHz frequencies. It will also provide the 3f demod signals. The box will contain 2 8-way power splitters, 2 frequency triplers, 2 2-way power splitters. The box will have to be powered. |
This page describes the 40m Upgrade Frequency Distribution Box.
The box is going to be installed in the LSC rack. It will get the demodulation signals from the frequency generation box and it will split it into several output so that it can be used by the demodulation boards.
The box is also going to generate frequency multiples as 3xf1, 3xf2, 2xf1 and 2xf2 demod signals.
Pictures
This is how the Frequency Distribution Box is going to look like.
Plans
RF Distribution
- Construction of Frequency Distribution Box
- exactly the same as for the frequency generation box
- Demod board filter upgrade: installation of surface mount low pass/high pass filter
- LSC rack routing
Early Thoughts
40m Upgrade RF Distribution Box
This box will serve to split the RF signal coming from the RF Modulation Generator into the signals to be fed to the demod boards.
It will distribute both 11 and 55 MHz frequencies. It will also provide the 3f demod signals.
The box will contain 2 8-way power splitters, 2 frequency triplers, 2 2-way power splitters.
The box will have to be powered.